View Reader Properties. Schlage AD-Series PIM400, AD-Series WPR400, AD-Series AD-200, AD-Series AD-300, AD-Series AD-250, Legacy CM993, Legacy KC2-9000, Legacy CM5700, Legacy KC2-5500, AD-Series CT5000
विज्ञापन
विज्ञापन
AD-Series Locks and Controllers
View Reader Properties
1 Connect the HHD to the controller.
2 Select
Device Options
.
3 Select
Properties
for the connected device.
4 Select the
Reader
tab.
Lock Properties on page 22 for more information.
View Reader Properties
Edit Reader Properties
1 Connect the HHD to the controller.
2 Select
Device Options
.
3 Select
Properties
for the connected device.
4 Select the
Reader
tab.
5 Edit the properties as desired.
6 Select
Save
before exiting the tab.
Lock Properties on page 22 for more information..
Put PIM400 into Link Mode
1 Connect the HHD to the PIM.
2 Select
Device Options
.
3 Select
PIM Properties
for the connected device.
4 Select the
Link
tab.
5 Select the door number from the drop-down box.
Î See the system administrator for the proper door number selection.
6 The PIM400 will stay in link mode for up to 30 minutes.
7 Put the lock (door) into link mode.
Î See the user guide that came with the lock for more information.
8 The PIM400 will automatically exit link mode once linking is complete.
Schlage Utility Software User Guide 20
डाउनलोड
विज्ञापन