View Reader Properties. Schlage AD-Series PIM400, AD-Series WPR400, AD-Series AD-200, AD-Series AD-300, AD-Series AD-250, Legacy CM993, Legacy KC2-9000, Legacy CM5700, Legacy KC2-5500, AD-Series CT5000

Below you will find brief information for Utility Software AD-Series AD-200, AD-Series AD-250, AD-Series AD-300, AD-Series AD-400, AD-Series PIM400, AD-Series WRI400, AD-Series WPR400, AD-Series WSM400, AD-Series PIB300, AD-Series CT5000. The Schlage Utility Software is used to configure, edit and program all supported devices. This application will run on a Schlage Handheld Device (HHD). The software allows for a variety of functions, such as programming a lock or controller, collecting audits from a lock, and viewing or editing properties of a device.

PDF
Document
Schlage Utility Software User Guide - AD-Series AD-200, AD-250, AD-300, AD-400, PIM400, WRI400, WPR400, WSM400, PIB300, CT5000 | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Program locks and controllers

  • Collect audit logs

  • View and edit device properties

  • Update firmware

  • Couple HHD to device

  • Set date and time

  • Diagnostics

  • SUS password management

  • Programming password

  • Language selection

Frequently asked questions

You can download the latest version of the Schlage Utility Software from the Schlage website and then follow the instructions in the User Guide. The synchronization software will automatically transfer the software to the handheld device.

To change the Programming Password, follow the instructions in the User Guide to log in as a Manager. Then select SUS Options > Programming Password. You will be asked to enter the Old Password and provide a New Password. The new password must be at least four characters long. You must confirm the New Password and then select Submit.

When Auto Update is enabled, the Schlage Utility Software will collect audits as soon as the lock is connected. When Manual Update is enabled, follow the steps in the User Guide. Confirm that the HHD is connected to the lock. Double-tap the displayed name of the connected lock. The audit collection will begin. A progress indicator will be displayed during collection of the audit. A message will be displayed once audit collection is complete. Collecting audits on the HHD does not delete the audits from a lock. Collected audits will be transferred from HHD to your Access Control Software the next time they are synchronized. Collecting audits on the HHD does not add/remove users to/from a lock.

Preparing document for printing…
0%