Easy Update. HP t5745 Thin Client, t5550 Thin Client, t5740e Thin Client, t820 Flexible Thin Client, t620 Flexible Thin Client, t5570e Thin Client, t5570 Thin Client, t510 Flexible Thin Client, t610 PLUS Flexible Thin Client, t620 PLUS Flexible Thin Client

2 Easy Update

Easy Update enables you to update a thin client’s software.

NOTE: Easy Update can perform simultaneous install, update, and remove actions. If there are problems with the installation, try performing each action separately.

On thin clients running Windows Embedded operating systems, you can perform the following procedures using Easy Update:

NOTE: On Windows Embedded operating systems, you must manually disable and enable the write filter before and after updating components.

●

Update the image

●

Install and update software components

On thin clients running HP ThinPro, select the Update tab to install one of the following:

●

Full image updates

NOTE: You need a USB flash drive to perform an image update. The USB flash drive capacity must be larger than the image file to be downloaded plus 200 MB.

●

Service pack updates

●

Package updates

On thin clients running HP ThinPro, select the Options tab to configure the following:

●

Networking Proxies—Enter a Manual Proxy Configuration or select No proxies.

●

Repository Locations—Enter the URLs for repositories containing updates for the thin client.

NOTE: By default, the locations are set to the HP FTP site and need to be changed only if you are configuring custom repositories.

2 Chapter 2 Easy Update