- No category
advertisement
Warning mail
The following mail will be sent to notify of a trouble occurrence to a registered address when the trouble occurs.
HD600 (192.168.0.250) STATUS REPORT
DATE: 2009-1-1 12:00:00
STATUS: The description of the trouble will be displayed. (Example: MAIN THERMAL
ERROR)
Indication
DATE
STATUS
Description
Time and date when the trouble occurred will be displayed.
The description of the trouble will be displayed.
Thermal error:
Alteration detection:
Lost of the recording area:
HDD write error detection:
HDD S.M.A.R.T. warning:
THERMAL ERROR
ALTERED
"V-ERROR EVT" indicates a lost of the event recording area.
"V-ERROR NML" indicates a lost of the normal recording area.
"V-ERROR CPY" indicates a lost of the copy area.
"V-ERROR PRE-XX" indicates a lost of the pre-event recording area (XX indicates camera channel number).
DISK ERROR XX
XX indicates disk number (sequential serial number)
DISK WARNING XX
XX indicates disk number (sequential serial number)
HDD remaining capacity warning*1:
HDD hour meter warning:
Power outage detection:
Auto remove of link:
Fan error:
Copy media error:
Other errors:
HDD error:
RAID recovery failure:
<except FULL>
HDD-NORMAL CAPACITY REMAINS **%
HDD-EVENT CAPACITY REMAINS **%
** indicates the set value (%) - 1
<FULL>
HDD-NORMAL IS FULL
HDD-EVENT IS FULL
HDD HOUR METER WARNING
POWER LOSS
LOGICALLY REMOVED HDD XX
XX indicates disk number (sequential serial number)
1DOWN
FAN ERROR
MEDIUM ERROR
UNDEFINED ERROR
HDD-ERROR
RAID 5 RECOVERY FAILURE X-Y x indicates unit number, y indicates disk number
HDD remaining capacity warning
A warning mail with the <except FULL> content will be sent when the remaining disk capacity becomes less than the set value for "HDD capacity warning" in the "Maintenance" menu. After a warning mail is sent, a warning mail with the <except FULL> content will be sent each time 1% of the remaining disk capacity is reduced, and a warning mail with the <FULL> content will be sent when there is no remaining disk capacity.
123
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Preface
- 4 About the user manuals
- 4 System requirements for a PC
- 5 Trademarks and registered trademarks
- 5 Abbreviations
- 6 Restrictions upon display of images
- 7 Before using this product
- 7 Video Motion Detection (VMD) function
- 7 Time display of recorded images
- 7 images
- 8 Recording mode
- 8 Event type
- 9 Major operating controls and their functions
- 9 Front view
- 14 About the operation window
- 14 Monitor
- 20 Basic operation
- 20 panel
- 23 Operations using a mouse
- 27 Login operation at startup
- 28 Monitor live images from cameras
- 29 Select a monitor (monitor 1/monitor 2)
- 30 Display images on a 1-screen
- 30 status bar
- 32 Display images on a multiscreen
- 34 sequentially (sequence display)
- 35 Record images
- 35 Recording areas on the hard disk drive
- 36 Record images (Manual recording)
- 37 Emergency recording
- 38 Play recorded images
- 43 Play images from a designated point
- 45 Search and play
- 45 event search)
- 45 Search filter
- 48 (copy data search)
- 48 Copied data list window
- 51 search)
- 56 Event function
- 56 Event action
- 57 Cancel the alarm action
- 58 Suspend the alarm action
- 58 Cancel the error action
- 59 Copy recorded images
- 62 recorders in cascading connection
- 62 Configuration
- 63 Operation using the buttons on the front panel
- 63 Operate using the system controller
- 64 Operate the camera
- 64 Display the camera control panel
- 65 Panning/Tilting
- 65 Zooming
- 66 Focus adjustment
- 66 Iris adjustment
- 67 Preset position function
- 69 Auto functions (Auto panning, etc.)
- 70 Operate the setup menu of the camera
- 71 Disk management
- 71 manually
- 73 Format (initialize) an SDHC/SD memory card
- 74 Configure the network settings
- 74 Configure the network settings of the recorder
- 74 Configure the network settings of the PC
- 76 Network security of the recorder
- 76 The security function of the recorder
- 76 To enhance the network security
- 77 Display the operation window
- 78 About the operation window
- 78 Top Page
- 79 [Control] button
- 81 Status display area
- 82 Download operation area
- 82 [HDD] tab
- 83 [CAM] tab
- 85 Monitor live images from cameras
- 85 Display images on a 1-screen
- 87 Display images on a multiscreen
- 88 sequentially (sequence display)
- 89 Record images
- 89 Record images (Manual recording)
- 90 Play recorded images
- 93 Search and play
- 93 event search)
- 96 search)
- 98 Check a list of copied recorded images
- 100 Event function
- 100 Event action
- 102 Cancel the alarm action
- 102 Suspend the alarm action
- 103 Cancel an error action
- 104 Copy recorded images
- 106 played
- 108 Play the copied/downloaded recorded images
- 108 on an SDHC/SD memory card or a DVD
- 108 downloaded using a web browser
- 108 Download the viewer software
- 109 Install the viewer software
- 110 Uninstall the viewer software
- 111 Play the downloaded recorded images
- 112 Save the displayed image
- 112 Print the displayed image
- 113 Alteration detection
- 114 Operate the camera
- 114 Panning/Tilting
- 115 Zooming
- 115 Focus adjustment
- 116 Iris adjustment
- 116 Preset position function
- 117 Auto functions (Auto panning, etc.)
- 118 Operate the setup menu of the camera
- 119 Disk management
- 119 manually
- 121 Format (initialize) an SDHC/SD memory card
- 122 Notification by e-mail
- 122 Alarm mail
- 123 Warning mail
- 124 Troubleshooting
- 129 Glossary