advertisement
![Sleep Feature. RCA NiteGlo RCU4GLW, RCU 4 GLW, UNIVERSELLE SYSTEMLINK 3 | Manualzz Sleep Feature. RCA NiteGlo RCU4GLW, RCU 4 GLW, UNIVERSELLE SYSTEMLINK 3 | Manualzz](http://s3.manualzz.com/store/data/023114158_1-73207b1bcd241d086521773991985807-360x466.png)
Sleep Feature
This feature will turn off your TV at the time you choose from 1 to 99 minutes.
To Program Sleep Feature:
1. Press and hold the
SLEEP
button.
INDICATOR LIGHT
will stay lit.
Release the
SLEEP
button.
2. Enter time in minutes using the numerical key pad.
(Minutes 1 thru 9: press
0
before the actual number maximum: 99 minutes).
3. Leave remote aimed at television. (Sleep Feature will not work unless remote is left aimed at television.)
To Turn Off The Sleep Timer:
Sleep timer program will be cancelled and the clock reset to zero by either of the following:
Press and hold
SLEEP
button until
INDICATOR LIGHT
blinks or press
POWER
button, turning TV OFF.
Niteglo Feature
The Lightbulb button is used to control lighting the keypad.
Press the LIGHTBULB button and hold until the remote lights up.
The entire keypad will light and go off after 5 seconds.
Every time a button is pressed the Keypad will light, and remain lit until the command is completed.
Do not press the lightbulb unless you want to completely deactivate the keypad light.
To deactivate the Keypad light press the
LIGHTBULB button.
To save battery power, do not activate the NiteGlo feature when remote is used in well lit rooms.
12
BLINK
advertisement
Related manuals
advertisement
Table of contents
- 3 Button Description
- 3 Battery Installation
- 5 TV Codes
- 7 VCR Codes
- 8 Cable Box
- 9 Cable Box Codes
- 11 Code Search
- 11 Code Retrieval
- 12 Sleep Feature
- 12 NiteGlo Feature
- 13 Trouble Shooting
- 13 Helpline
- 14 Additional Accessories