Trouble Shooting. RCA NiteGlo RCU4GLW, RCU 4 GLW, UNIVERSELLE SYSTEMLINK 3

Trouble Shooting

P R O B L E M

Red light not blinking when you press any key

S O L U T I O N

A)Replace the batteries (with fresh, new AAAAlkaline batteries).

B) Check that batteries are properly installed.

The RCU4GLW does not operate your devices

A) Try all the codes listed for your brand.

B) Try the Code Search method (page 11).

Not performing commands properly

Problems programming a TV/VCR

Combo Unit

VCR not recording

Start Code Search over again to locate the proper code for full compatibility.

Try the VCR code for your brand. Some combo units, however, may require both a TV and a VCR code for full operation.

As a safety feature on your remote, you must press the REC button twice.

Channel up and down do not function on an RCATV

Due to some designs, the original remote will only perform these functions.

Problems changing channels

No response after pressing a key

If your original remote required ENTER after a channel, press ENTER after you select a channel.

A ) Make sure you have new batteries, and you are aiming your remote at your devices.

B) Check that batteries are properly installed. See page 3.

Sleep feature does not work

Remote must remain aimed at television after SLEEP is set in order for it to work.

Reprogramming may be required after batteries are removed.

RCU4GLW Help Line

If you need additional set-up help, please call the RCU4GLW Helpline at:

1-800-316-8756

13