To Dry Clothes. Kleenmaid LTKA6

Dryer Operation

To Dry Clothes

IMPORTANT: Refer to the INSTALLATION

INSTRUCTIONS before using dryer.

IMPORTANT: Before using dryer for the first time, use an all-purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside dryer drum.

IMPORTANT: Remove all sharp objects from laundry to avoid tears and rips to items during normal machine operation.

1. Sort items into separate loads.

3. Add clothes loosely into dryer drum (9.0 kg maximum dry clothes load). Add fabric softener sheet, if desired.

IMPORTANT: To avoid damage to dryer, do not use more than one fabric softener sheet per load.

D666IE0A

D666IE0A

Figure 20

4. Close loading door. Dryer will not operate with the door open.

D305IE1A

Figure 18

2. Remove lint filter cover, clean lint filter and replace cover.

Figure 19

D689IE0A

D689IE0A

D668IE0A

D668IE0A

Figure 21

5. Set FABRIC SELECTOR. Follow garment manufacturer’s care labels for recommended temperature settings.

6. Select timer setting in cycle desired:

AUTOMATIC REGULAR/DELICATE, TIME

DRY, or AUTOMATIC PERMANENT PRESS/

KNITS. These cycles control the drying time.

The ENERGY SAVER/DAMP DRY settings, marked with a dot (

•), show which dryer settings will use the least energy and will leave items damp for easier ironing.

7. Push timer knob in to start dryer.

NOTE: To stop dryer at any time, open the door or turn timer knob to an OFF position. To restart dryer, close door, reset timer if necessary, and push in the timer knob.

34 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802726