Exhaust System. Kleenmaid LTKA6

Maintenance

Exhaust System

The exhaust duct should be inspected after one year of use and cleaned if necessary by a qualified service person to remove any lint build-up. Inspect and clean exhaust duct every one to two years as required thereafter.

The weather hood should be checked frequently to make sure the dampers move freely, dampers are not pushed in and that nothing has been set against them.

Keep dryer area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

Do not obstruct the flow of combustion and ventilation air.

NOTE: Verify proper operation after servicing.

CAUTION

Any disassembly requiring the use of tools must be performed by a suitably qualified service person.

W299

Reinstallation of Shipping Materials

Remove front access panel by removing two screws.

Place the shock sleeves on all four shock absorbers.

Refer to Figure 24.

Insert hooked end of shipping brace into the open slot of the motor mount. Attach with bolts and washers.

Refer to Figure 24.

Reinstall front access panel.

1

2

4

H336I

3

H336I

3

4

1

2

Shock Sleeves

Motor Mount

Bolts and Lockwashers

Hooked End of Shipping Brace

Figure 24

Refer to the INSTALLATION INSTRUCTIONS for proper procedures whenever the washer is moved.

38 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802726