Printer Selection. KIP KIP Request, KIP Request Software

Below you will find brief information for KIP Request. The KIP Request software can be used to send documents, or sets of documents, to a KIP Printer. Request can be used from a workstation enabling users to print across a network. It has many advanced features and powerful functions to allow customization of prints.

PDF

Document

KIP Request Operator Guide

Printer Selection

The label or name of the printer can be used to send jobs to multiple KIP printers on the network if so configured. Click on the name to select the printer to send the job to. Printer status will also be displayed in the lower area of the main screen.

Printer Information – Monochrome Systems

Roll status, cover or door opened, toner requirement, misfeeds, and other selected printer status’ are displayed in the lower center of the main screen.

Printer Information – Color Systems

Printer Roll status (media type and paper remaining), cover or door opened, toner status, paper feed issues or errors and meter information is displayed in the lower center of the main screen.

File

Submit Job

Submits a job after files selected

Exit

Exits Request software

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.

- 49 -

KIP Request Operator Guide

View

Refresh

This updates the directory and file information in the main screen.

Quick view

Allows a view of the selected image with grayscales There are no panning or enlarge view tools in this viewer.

View thumbnail

This allows a thumbnail view of a selected image in the lower right corner of the main screen.

This allows the customer to view any accepted raster or vector file that is highlighted. (NOTE: .CGM

files are not viewable from this

feature.) This viewer allows panning and other viewing tools.

Notes:

• Zoom into areas of the image by holding down the right mouse button and drawing a zoom area to be seen in red.

• Click on any area to zoom back out

View all tagged images

Opens all tagged files in the viewer noted. Use the “arrows” to view the next document or the dropdown to view the selected document.

Convert all tagged to…

This will convert the selected file(s) to any of the accepted raster formats. (TIFF Group 4, CALS Group

- 50 -

Key features

Print across a network
Advanced features and powerful functions
Customizable prints
Configure KIP IPS
Scan to FTP location
Accounting with Passwords and Usernames
Retrieve scanned images from KIP IPS Mailboxes
Configure KIP PrintNet

Frequently asked questions

KIP Request software can be used to send documents to a KIP printer from a workstation, allowing users to print across a network. It has many advanced features for customizing prints.

You can find KIP printers by selecting "Printers" and then "Find KIP Printers" in the upper menu. You can also manually add a printer by setting its IP address.

KIP Request supports a wide range of file types, including HPGL/2 formats, HPGL formats, HP-RTL formats, Autodesk DWF, Adobe Portable Document Format (PDF), Postscript, Encapsulated Postscript, TIFF Group 4, CALS Group 4, PCX Monochrome, Intergraph, JPEG, Computer Graphics Metafile, Government Group 4, ASCII File formats, KIP Format, and more. Some file types may require additional options to be enabled.

KIP Request 6.5 simplifies folding parameters. You can select a fold packet style or leave the settings configured for the Controller to determine the best fold packet for your original.

KIP Request allows you to adjust advanced settings, such as zoom, stamp application, folding options, pen control, and 2-up printing.