KIP Request Operator Guide
4, .PCX, .TLC, .CIT or .PDF) You will also be prompted as to the placement of the files once converted.
Sort
This menu is the same as File Order. Please see this section for details.
Option
Save Current Job
This allows the user to save the job file list and the applied settings.
The complete name (including path information) can use up to 256 characters (Does not save the files, only the file settings).
Recall Saved Job
Allows the customer to recall and reprint a job that has been previously saved.
Recall Recent Job
Request saves the job information for the last 15 Requested jobs.
RECALL RECENT JOB allows the user to recall one of these jobs.
Recall History Jobs
Job History can be used to call up and print jobs that were previously printed. By selecting a job from the Job History list, the job can be changed and resubmitted for printing.
1. With Request open go to Option and select “Recall History Jobs”
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 51 -
KIP Request Operator Guide
2. The following window will open up
3. From this list of jobs that are saved in the History list choose the desired job to reprint. The chosen job will be loaded into the selected job area and all prior settings will also be loaded.
4. At this point the selected job can be sent to the printer to be reprinted or files can be added to it creating a new job. Additional settings may also be applied and/or changed.
5. The new job with all of its settings will be added to the Job History folder for latter use.
Modify Pens (Plot file setup)
Allows the user to apply and modify the settings of vector plot files. Users can override files’ pen table and screening information. Plot File Setup also lets the user apply borders, modify halftone settings, dither patterns, and more (for more information see Advanced Settings above page 29).
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 52 -
KIP Request Operator Guide
Prompt Setup
Prompt Setup lets the Administrator define mandatory settings before a job can be submitted.
Making Fields Required
When a field is required, the user must enter data before the job will be submitted. If no information is entered the following prompt will be displayed for each of the required fields
Making Pull-Down Menus
When checked, the user must choose from an established list of field entries. Normally, users cannot add a pull down entry without knowing the Request Master Password. Each pull down entry can also be password protected, so only the specific users can select specific entries.
Default ‘Fold’ ON
Checking this box will apply Folding feature as soon as Request is opened.
Default Stamp ON
Checking this box will apply Stamping feature as soon as Request is opened.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 53 -
KIP Request Operator Guide
Advanced
Advanced features can be turned ‘On’ or ‘Off’ by clicking on this function.
Features are:
1. Selecting the same file multiple times from within in the same folder.
2. Enlarge/Reduce on a per file basis.
3. Manual image placement.
4. Load/Save compressed jobs.
Find KIP Printers
This is located under the Printer header at the top of the screen.
This menu allows users to attach to KIP Printers or add a new KIP
Printer. FIND KIP PRINTERS will automatically search for shared KIP
Printers installed, and will add them to the list of available printers.
Simply check the box next to the printers to which you would like to submit prints. Click OK to finish.
Add a Printer
There are two methods to adding a printer to the list, by IP address or IPS name. We recommend IP address only for the KIP
IPS. Please contact the Network Administrator for the IP address of your KIP IPS.
Details of the settings / configuration are noted in the Request
Installation section.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied, reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 54 -
