Envoy-S Metered Multiphase Installation and Operation
The Enphase Envoy-S
The Enphase Envoy-S is an integral component of the Enphase Home Energy Solution. It operates between Enphase Microinverters, or other PV system, and the Enphase Enlighten™ web-based monitoring and analysis software. When used with Enphase devices, the Envoy-S can control grid management functions and monitor PV production and site consumption. When used with non-Enphase PV systems, it can collect production and consumption data, but it does not control grid management functions.
The Envoy-S Metered Multiphase uses precision Current Transformers (CTs) to measure PV production from the solar main supply switch and home energy consumption from the AC mains.
How the Enphase Home Energy System Works
This integrated system maximises energy harvest, increases system reliability, and simplifies design, installation and management.
The Enphase Microinverter converts the DC output of the PV module into grid-compliant AC power. In addition to performing the DC to AC conversion, it maximises energy production by using a sophisticated
Maximum Power Point Tracking (MPPT) algorithm.
The Envoy-S operates as a gateway between the Enphase Microinverters and Enlighten. It collects energy and performance data from the PV system over on-site AC power lines, and it forwards that data to
Enlighten, via the Internet, for statistical reporting. Enlighten analyzes the data collected by each communicating device. Enlighten automatically detects any shortfall in energy production, identifies possible causes, and suggests solutions. Enlighten constantly monitors every Enphase device connected to the Envoy-S and is essential for system monitoring and troubleshooting.
Enlighten provides a wide range of information on system performance. You can access Enlighten on your computer or mobile device and view current performance information at any time.
6
© 2016 Enphase Energy Inc. 141-00035 Rev 01