advertisement
HP 3PAR StoreServ Cluster Extension
Software Installation Guide
Abstract
This guide contains detailed instructions for installing and removing HP 3PAR StoreServ Cluster Extension Software. The intended audience has independent knowledge of related software and of the HP 3PAR StoreServ Storage and its software.
HP Part Number: 5697-2895
Published: December 2013
Edition: 5
© Copyright 2013 Hewlett-Packard Development Company, L.P.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial
Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Acknowledgments
Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Microsoft®, Windows®, Windows® XP, and Windows NT® are U.S. registered trademarks of Microsoft Corporation.
Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 HP 3PAR StoreServ Cluster Extension Software Installation Guide
- 3 Contents
- 5 1 Preparing to install HP 3PAR StoreServ Cluster Extension
- 5 Ideal environment
- 5 Network communication requirements
- 5 Storage replication link requirements
- 5 Server cluster infrastructure requirements
- 6 How HP 3PAR StoreServ Cluster Extension Software interacts with its environment
- 6 Failover function
- 6 How HP 3PAR StoreServ Cluster Extension utilizes virtual volumes
- 6 How HP 3PAR StoreServ Cluster Extension stores information
- 6 General installation prerequisites
- 7 Disk space and system memory requirements
- 7 Required firmware and software
- 8 2 Installing HP 3PAR StoreServ Cluster Extension Software
- 8 Prerequisites
- 8 Pre-installation procedures
- 8 Checking the IP network setup and SAN configuration
- 9 Installing the multipath software
- 9 Installing and configuring the JRE
- 9 Installing HP 3PAR Command Line Interface (CLI)
- 9 Configuring the HP 3PAR StoreServ Storage
- 9 Creating hosts and setting host persona
- 10 Creating virtual volumes and adding a LUN presentation
- 10 Creating Remote Copy volume groups
- 10 LUN presentation to the secondary virtual volume(s)
- 10 Installing Microsoft Failover Cluster (MSFC) on all nodes
- 11 Installing HP 3PAR StoreServ Cluster Extension Software
- 14 HP 3PAR StoreServ Cluster Extension maintenance
- 14 Modifying the 3PAR StoreServ Cluster Extension installation
- 14 Repairing the 3PAR StoreServ Cluster Extension installation
- 14 Removing 3PAR StoreServ Cluster Extension
- 15 Troubleshooting installation and maintenance problems
- 19 Registering the resource type and resource extension DLL manually
- 20 Unregistering the resource type and resource extension DLL manually
- 20 Registering the CLX PowerShell Cmdlet DLL manually [Windows Server 2012 only]
- 21 Unregistering the CLX PowerShell Cmdlet DLL manually [Windows Server 2012 only]
- 21 Upgrading from HP 3PAR Cluster Extension 1.00.00, 2.00.00, and 3.0X.00 (Windows Server 2008/2008 R2)
- 22 Upgrading from HP 3PAR Cluster Extension 3.0X.00 (Windows Server 2012)
- 22 Configuring CLX after upgrading to 3.02.00 (For Windows Server 2008/2008 R2 and Windows Server 2012)
- 24 3 Licensing
- 24 Retrieving a license key
- 24 Using AutoPass to retrieve permanent license keys
- 24 Licensing models supported by CLX
- 25 Using the clxautopass command-line utility
- 25 Installing instanton license keys
- 25 Applying host based permanent license
- 25 Importing a license key from a file
- 25 Using the HP 3PAR StoreServ Cluster Extension registration tool
- 25 Applying Device based permanent license
- 25 Applying Device based permanent license keys in clustered environment
- 26 Applying Device based permanent license keys in non-clustered environment
- 27 Removing license key
- 28 4 Support and other resources
- 28 Contacting HP
- 28 Related information
- 28 Whitepapers
- 28 HP websites
- 29 Typographic conventions
- 30 Glossary
- 31 Index