Pre-Installation Information. Imagine communications Configuration utility

2

RouterMapper Quick-Start Guide

Pre-Installation Information

System Requirements

RouterMapper may be used with any IBM-compatible computer that meets these minimum requirements:

CPU

RAM

266 MHz Pentium II

At least 128 MB

Hard Disk Space At least 30 MB free

Additional Disk Drives CD-ROM or CD-RW

Operating System

*

Windows 2000

Windows XP

Windows Me

Windows Vista (requires CCS Navigator™)

Port(s)

Display Resolution

Pointing Device

Microsoft® Internet Explorer 3.0 or later

Serial port, RS-232 or RS-422/9600 baud or higher

(Opus only) Ethernet port

800x600, 256 colors

1024x768, high color (16 bit) recommended

Mouse, trackball, touch screen, or other pointing device

* Windows 2000, Windows Me, Windows XP, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Communication Dependencies

Table 1 provides a list of communication device dependencies for router frames,

control panels, and master control panel. To communicate with (i.e., to download, poll and/or control) the device(s) listed in the left column, the communication link or links marked with a “•” must be available (that is, properly configured and connected).

Table 1. Communication Dependencies

Device(s)

Edge protocol gateway

Opus ABA panels

Opus frames

Opus master control panels

•

•

Serial Connection or Ethernet

Gateway Connection to Router

System

•

•

Ethernet Connection to Opus

Master Control System

RouterMapper Configuration Utility Quick-Start Guide, Edition F (October 2007)