JVC RC-ST3 User Guide Manual

ADJUSTING THE SOUND

JOG VOLUME PHONES HBS VOL /

TUNER TAPE CD

PRESET/

REPEAT PROGRAM INTRO

FM MODE RANDOM

HBS EQ VOL

PRESET EQ HYPER-BASS SOUND EQ

Volume adjustment

To increase the volume

Turn JOG VOLUME clockwise (or press VOL

5 on the remote control unit).

To decrease the volume

Turn JOG VOLUME counterclockwise (or press VOL

∞ on the remote control unit).

Caution

Do not turn off the unit with the volume set to an extremely high level; otherwise a sudden blast of sound might be produced damaging your hearing and/or the speakers, when you turn on the unit next time or start playing another source.

Changing the EQ (equalizer) setting

The unit has several preset EQ (equalizer) settings so that you can select one that most matches the type of music being played.

Press PRESET EQ (or EQ on the remote control unit) repeatedly.

Each time you press the button, the EQ setting changes as shown below.

ROCK

FLAT

JAZZ POP

CLASSIC

Listening through headphones

Connect a pair of headphones to the PHONES jack.

Use commercially available 3.5-mm stereo mini headphones (16

Ω

to 32

Ω

).

No sound comes out of the speakers when headphones are connected.

Cautions

• Turn down the volume before connecting headphones and keep the volume level low; as listening at high volumes could damage your hearing.

• Do not drive while listening through headphones.

Reinforcing the bass sound

You can enjoy powerful bass sound by turning on the

Hyper-Bass Sound effect.

Press HYPER-BASS SOUND (or HBS on the remote control unit).

When the Hyper-Bass Sound effect is turned on, the HBS indicator lights up in the display window.

To turn off the effect

Press the same button again so that the HBS indicator goes off.

02_01-18_RCST3SL_B_En.p65

7 2/4/03, 2:38 PM