advertisement
Troubleshooting
Remote does not operate your device.
• Press the device button of the device you want to control.
• Program the remote with a new code.
• Install new batteries. (You might have to reprogram your remote after installing new batteries.)
• Remote may not be compatible with your device.
Remote does not operate some features of
your device.
• Sometimes a particular code might operate some features but not all. Try programing remote with a new code.
• Remote may not be able to operate all features of your device or button names might be different than your device.
Red Indicator blinks and stays on after you program a product code.
• Remote did not accept the code.
• Try to program the code again or try a different code.
Remote Code is not available for a combo device
(e.g. TV/VCR)
• See section for controlling combo devices.
Remote buttons are not operating properly
• Check to ensure the remote is not in shift mode.
Press and release the
SETUP/SHIFT button and
see if the remote buttons operate properly. If this does not help, press and release the
SHIFT/SETUP
button again to exit the shift mode.
For additional troubleshooting information please visit www.jascoproducts.com
13
advertisement
Related manuals
advertisement
Table of contents
- 2 Introduction
- 3 Setup
- 3 Battery Installation
- 3 Battery Saver
- 3 Code Saver
- 4 Button Functions
- 6 Programming Your Remote
- 6 Direct Code Entry
- 8 Auto Code Search
- 10 Using Your Remote
- 11 Master Volume Feature
- 12 Code Identification
- 12 Reset to Factory Settings
- 13 Troubleshooting
- 14 Warranty
- 15 FCC Statement
- 16 Introduction
- 17 Configuration
- 17 Installation des piles
- 17 Économiseur de piles
- 17 Sauvegarde des codes
- 18 Fonctions des touches
- 20 Programmation de la télécommande
- 20 Entrée directe de code
- 22 Recherche automatique de code
- 24 Utilisation de la télécommande
- 25 Fonction maîtresse du volume
- 26 Identification des codes
- 26 Réinitialisation aux paramètres du fabricant
- 27 Dépannage
- 28 Garantie
- 29 Déclaration de conformité FCC