advertisement
Intel
®
Server Board S5000VSA TPS Regulatory and Certification Information
9. Regulatory and Certification Information
WARNING
To ensure regulatory compliance, you must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products / components will void the UL listing and other regulatory approvals of the product and will most likely result in noncompliance with product regulations in the region(s) in which the product is sold.
To help ensure EMC compliance with your local regional rules and regulations, before computer integration, make sure that the chassis, power supply, and other modules have passed EMC testing using a server board with a microprocessor from the same family (or higher) and operating at the same (or higher) speed as the microprocessor used on this server board. The final configuration of your end system product may require additional EMC compliance testing.
For more information please contact your local Intel Representative.
This is an FCC Class A device. Integration of it into a Class B chassis does not result in a Class
B device.
Intended Application
– This product was evaluated as Information Technology Equipment
(ITE), which may be installed in offices, schools, computer rooms, and similar commercial type locations. The suitability of this product for other product categories and environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment, etc.), other than an ITE application, may require further evaluation. This is an FCC Class A device.
Integration of it into a Class B chassis does not result in a Class B device.
Note: The use and/or integration of telecommunication devices such as modems and/or wireless devices have not been planned for with respect to these systems. If there is any change of plan to use such devices, then telecommunication type certifications will require additional planning. If NEBS compliance is required for system level products, additional certification planning and design will be required.
9.1.1
•
•
•
•
•
•
•
Product Safety Compliance
UL60950 – CSA 60950 (USA / Canada)
EN60950 (Europe)
IEC60950 (International)
CB Certificate & Report, IEC60950 (report to include all country national deviations)
BSMI Declaration of Conformity (Taiwan)
Belarus License – Listed on System License (Belarus)
UL 60950 Recognition (USA )
Revision 1.6 Intel order number: D36978-008 45
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 12 Introduction
- 12 Chapter Outline
- 12 Server Board Use Disclaimer
- 13 Product Overview
- 13 Feature Set
- 14 Server Board Layout
- 15 Server Board Mechanical Drawing
- 17 Feature Set
- 18 Functional Architecture
- 18 5000V Controller Hub (MCH)
- 18 Processor Sub-system
- 20 Thermal Design Power of 35 W (Processor Population Rules)
- 21 Common Enabling Kit (CEK) Design Support
- 21 Memory Sub-system
- 22 Supported Memory
- 23 DIMM Population Rules
- 24 Memory Mirroring
- 24 Enterprise South Bridge (ESB2-E)
- 25 PCI Sub-system
- 25 PCI Express* Overview
- 25 PCI Express* Hot-Plug
- 26 SATA Support
- 26 SATA RAID
- 27 Embedded RAID Technology II Option ROM
- 27 Parallel ATA (PATA) Support)
- 27 Ultra ATA
- 27 IDE Initialization
- 27 USB 2.0 Support
- 28 Video Support
- 28 Video Modes
- 28 Video Memory Interface
- 29 Dual Video
- 30 Network Interface Controller (NIC)
- 30 Super I/O
- 31 Serial Ports
- 32 Removable Media Drives
- 32 Floppy Disk Controller (FDC)
- 32 Keyboard and Mouse Support
- 32 Wake-Up Control
- 33 Platform Management
- 33 Power Button
- 33 Sleep States Supported
- 33 S0 State
- 33 S1 State
- 34 S4 State
- 34 S5 State
- 34 Wakeup Events
- 34 Wakeup from S1 Sleep State
- 34 Wakeup from S3 Sleep State (BFAD Workstation Only)
- 34 Wakeup from S4 and S5 States
- 34 AC Power Failuar Recovery
- 35 PCI PM Support
- 35 Reset# Control
- 35 PCI Vaux
- 35 System Management
- 35 CPU Thermal Management
- 36 System Fan Operation
- 36 Light-Guided Diagnostics – System Status and FRU LEDs
- 38 Connector / Header Locations and Pin-outs
- 38 Board Connectors
- 38 Power Connectors
- 39 Control Panel Connector
- 40 I/O Connectors
- 40 VGA Connector
- 40 NIC Connectors
- 41 ATA-100 Connector
- 42 SATA Connectors
- 42 Serial Port Connectors
- 43 Keyboard and Mouse Connector
- 43 USB Connector
- 44 Fan Headers
- 45 Jumper Block Settings
- 45 Recovery Jumper Blocks
- 46 BIOS Select Jumper
- 46 Other Configuration Jumpers
- 47 Light-Guided Diagnostics
- 47 5-Volt Standby LED
- 47 Fan Fault LEDs
- 47 System ID LED, System Status LED, and POST Diagnostic LEDs
- 47 DIMM Fault LEDs
- 48 Processor Fault LEDs
- 49 Power and Environmental Specifications
- 49 Server Board S5000VSA Design Specifications
- 49 Processor Power Support
- 50 Power Supply Specifications
- 50 Output Power / Currents
- 51 Grounding
- 51 Standby Outputs
- 51 Remote Sense
- 51 Voltage Regulation
- 52 Dynamic Loading
- 52 Capacitive Loading
- 53 Closed Loop Stability
- 53 Common Mode Noise
- 53 Ripple / Noise
- 53 Timing Requirements
- 55 Residual Voltage Immunity in Standby Mode
- 56 Regulatory and Certification Information
- 56 Product Regulatory Compliance
- 56 Product Safety Compliance
- 57 Product EMC Compliance – Class A Compliance
- 57 Certifications / Registrations / Declarations
- 57 Product Ecology Requirements
- 59 Product Regulatory Compliance Markings
- 61 Electromagnetic Compatibility Notices
- 61 FCC Verification Statement (USA)
- 62 ICES-003 (Canada)
- 62 Europe (CE Declaration of Conformity)
- 62 VCCI (Japan)
- 63 BSMI (Taiwan)
- 63 RRL (Korea)
- 63 CNCA (CCC-China)
- 64 Appendix A: Integration and Usage Tips
- 65 Appendix B: Sensor Tables
- 68 Appendix C: POST Code Diagnostic LEDs
- 72 Glossary
- 75 Reference Documents