advertisement
EA101EQ-G App
SPEAKER BALANCE
Speaker Balance adjusts the relative volume of the left and right speakers. Use this control to adjust the stereo sound from the speakers if they are unevenly placed relative to the listening position. Each control can be adjusted +/-100 with 0 being center.
1. In the settings menu tap Balance.
2. With a fingertip, slide the blue dot on the
Speaker Balance slider to adjust balance to the desired position. A bubble will appear to indicate the setting.
3. Setting will be automatically stored in the amp.
4. To return to the Setup Menu tap the back button on the phone or tablet.
5. When finished tap the slider icon at the top right to return to the source/volume screen.
Figure 11 EA101EQ-G App - Balance
17
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Important Safety Instructions
- 3 Table of Contents
- 4 Introduction
- 5 EA101EQ-G Features
- 6 Power
- 6 IR Sensor
- 6 Front Panel Display
- 6 Source
- 6 Phones
- 6 Volume Control
- 7 Rear Panel Features
- 7 AC Mains
- 7 Line In
- 7 Sub Out
- 7 Coax In
- 7 Speaker Out
- 8 Reset
- 8 Service
- 8 Optical In
- 9 IR Remote Features
- 9 Power
- 9 Volume/Transport
- 9 Input Select
- 9 Bluetooth
- 10 Installation
- 10 Amplifier Location
- 10 Typical System
- 11 Connections
- 11 Speaker Connections
- 11 Other Connections
- 12 IR Remote/Front Panel Control
- 12 ON/OFF
- 12 Volume/Mute
- 12 Source Select
- 13 Bluetooth
- 13 Bluetooth Pairing ELAC USB Amplifier
- 13 Bluetooth Pairing EA101EQ-G Control
- 14 EA101EQ-G App
- 14 Master Volume
- 14 Offset Volume
- 15 Setup
- 15 Input Names
- 16 Bass/Treble
- 16 Screen Brightness
- 17 Speaker Balance
- 18 Remote Learning
- 19 About
- 20 Warranty
- 22 Wichtige Sicherheitshinweise
- 23 Inhaltsverzeichnis
- 24 Einleitung
- 25 EA101EQ-G Eigenschaften
- 26 An-/Aus-Schalter
- 26 Infrarot-Sensor
- 26 Display auf der Frontseite
- 26 Eingangsquellenwahl
- 26 Kopfhörerausgang
- 26 Lautstärkesteller
- 27 Bedienelemente auf der Rückseite
- 27 Netzeingang
- 27 Analoger Eingang 1 (Line In 1)
- 27 Analoger Eingang 2 (Line In 2)
- 27 Anschluss eines Subwoofers (Sub Out)
- 27 Koaxialer Digitaleingang (Coax In)
- 27 Lautsprecheranschluss (Speaker Out)
- 28 Reset-Schalter
- 28 Service-Buchse
- 28 Asynchroner USB-Eingang (USB)
- 28 Optischer Eingang 1 (Optical In 1)
- 28 Optischer Eingang 2 (Optical In 2)
- 29 Infrarot-Fernbedienung
- 29 Power
- 29 Lautstärke / Transportfunktion
- 29 Eingangsquellenwahl
- 29 Bluetooth
- 30 Aufbau und Anschluss
- 30 Standort des Vollverstärkers
- 30 Typische Gerätekonfigurationen
- 31 Anschließen von Lautsprechern
- 31 Schutzschaltungen
- 32 IR Remote / Bedienelemente auf der Front
- 32 ON/OFF
- 32 Lautstärke/Mute
- 32 Eingangsquellenwahl
- 33 Bluetooth
- 33 Audioübertragung über Bluetooth
- 33 Installation und Benutzung der APP
- 34 Funktionen der EA101EQ-G App
- 34 Gesamtlautstärke
- 34 Offset-Lautstärkeanpassung
- 35 Einrichtung
- 35 Benennung von Quellen
- 36 Bass- und Höheneinstellung
- 36 Helligkeit des Displays
- 37 Balance-Einstellung
- 38 Remote Learning
- 39 About
- 40 Garantiebestimmungen