Oppo user manual

I N S T A L L A T I O N

HDMI / MHL INPUT to BDP-105

F r o n t P a n e l R e a r P a n e l

HDMI Cable or HDMI/MHL Cable

Audio/Video Source

HDMI Cable x

The BDP-105 provides two HDMI input ports, located on the front panel and the back panel separately, both of which can accept up to 1080p high-definition video and digital audio. You can use the included HDMI cable to connect a source device such as a digital TV box, mobile phone or camcorder to the HDMI IN port(s). You can use the INPUT button on the OPPO remote to open the

Input Source Menu, which allows you to select the corresponding HDMI IN port.

x

Keep in mind that the HDMI IN port on the front panel is MHL (Mobile High-definition Link) compatible, which means if it is connected to another MHL-enabled device (like a smartphone) through a MHL cable or adaptor (not included), then this port is not only capable of accepting highresolution digital signals, but can also simultaneously charge the connected device.

NOTE x Both HDMI INPUT ports are HDMI v1.4 compatible and can accept up to 1080p high-definition video signal, however, due to internal bandwidth limits, the audio signal is up to

6ch/192kHz or

8ch/96kHz PCM, Dolby Digital, Dolby Digital Plus, DTS and AAC

.

20