Oppo user manual

A D V A N C E D O P E R A T I O N S

NOTE x

Some discs may prohibit the search operation. You will not be able to select a search location, or you may get an “invalid operation” icon after specifying a search location.

x

Some Blu-ray Discs feature their own search function. Follow the on-screen instructions to use the search function provided by such discs.

CD and SACD discs

You may specify a point to start playback by entering the disc elapsed time, track elapsed time or track number directly. When playing CDs and SACDs, the on-screen display automatically shows on the TV screen:

1 / 8 00:08:16 00:12:33

The on-screen display has the following components (from left to right): Playing Status, Track Number,

Time Counter, Progress Indicator, and Total Time.

To specify a playback location using one of the following search modes, press the GOTO button. Each press of the GOTO button switches the search mode in the following sequence:

(Track or Disc)Time Search

On-screen Display

Track Search

1.

Track time search. Searches for a specific time within the currently playing track.

x Press the GOTO button to place the cursor on the track Time Counter. Use the NUMBER or

ARROW buttons to enter the hours, minutes and seconds for your specified search and press the

ENTER button.

1 / 8 00:08:16 0 0 : 1 2 : 3 3

2.

Disc time search. Navigates you to a particular timestamp.

x

While the on-screen display is shown, press the PAGE UP or PAGE DOWN button to switch the

Time Counter to Disc Time mode. Press the GOTO button to place the cursor at the Disc Time

Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and seconds for your specified search and press the ENTER button.

5 / 8 00:40:46 0 1 : 0 2 : 3 3

3.

Select a track. To navigate to a particular track: x

Repeatedly press the GOTO button until the cursor is placed on the Track Number position. Use the NUMBER or ARROW buttons to enter or select the track number and press the ENTER button.

1 / 8 00:08:16 00:12:33

40