Avaya W310 WLAN Gateway Command Reference

Chapter 10 W310 Policy Commands

show-policy-statistics

User level: privileged, supervisor.

Command Mode: Root, PEP/AP Group

Use the show-policy-statistics command to display the hits per policy list rule.

• The IP and ether type for the Access Control List (ACL).

• IP for the Quality of Service (QoS).

Syntax:

The syntax for this command is: show-policy-statistics [<interface> <direction> [<listtype>]]

Syntax

<interface>

<direction>

<list-type>

Description

Policy list(s) for the specified interface.

! This parameter is required in the Root command mode only.

Sort the display by interface, the direction of the policy (to or from interface), or policy list number.

Policy list type - ACL or QoS.

Avaya W310 Command Reference Guide 217

Chapter 10 Policy Commands

Example::

W310-1# show-policy-statistics

Interface: floor2 Direction: In List: Default ACL List

Index Session Counter Packet Counter

--------- --------------- --------------

10000 0 0

Interface: floor2 Direction: In List: Default QoS List

Index Session Counter Packet Counter

--------- --------------- --------------

10000 0 0

Interface: floor2 Direction: Out List: Default ACL List

Index Session Counter Packet Counter

--------- --------------- --------------

10000 0 0

218

Interface: floor2 Direction: Out List: Default QoS List

Index Session Counter Packet Counter

--------- --------------- --------------

10000 0 0

Interface: floor1 Direction: In List: Default ACL List

Index Session Counter Packet Counter

--------- --------------- --------------

10000 0 0

Interface: floor1 Direction: In List: Default QoS List

Index Session Counter Packet Counter

--------- --------------- --------------

10000 0 0

Avaya W310 Command Reference Guide