8.1 Adjusting the handle. Wacker Neuson BFS 1345, BFS 735, BFS 1350, BFS 940
Add to My manuals66 Pages
advertisement
▼
Scroll to page 2
of
66
8 Operation
8 Operation
8.1
Adjusting the handle
1
Pos.
Description
1 Star grip (left/right)
The height of the stirrup handle can be adjusted according to the use and the body height of the operator.
Loosen the star grip on both sides, swivel the handle to the desired position and retighten the two star grip.
8.2
Adjusting the guide wheel
2
1
100_0304_op_0006.fm
Pos.
Description
1 Guide wheel
Pos.
Description
2 Mother
33
advertisement
Related manuals
advertisement
Table of contents
- 6 2.1 Means of representation for this operator's manual
- 7 2.2 Wacker Neuson representative
- 7 2.3 Described machine types
- 8 2.4 Identification of the machine
- 9 3.1 Principle
- 12 3.2 Qualification of the operating personnel
- 13 3.3 Protective gear
- 14 3.4 Transport
- 16 3.5 Operating safety
- 18 3.6 Safety during the operation of combustion engines
- 21 3.7 Safety during floor saw operation
- 23 3.8 Maintenance
- 25 3.9 Safety devices
- 29 6.1 Application
- 29 6.2 Maximum permissible tilt
- 30 6.3 Functional description
- 31 6.4 General instructions for use for diamond-edged cutting blades
- 33 8.1 Adjusting the handle
- 33 8.2 Adjusting the guide wheel
- 34 Adjusting the guide wheel
- 34 Aligning the guide wheel
- 34 8.3 Cutting depth setting
- 34 8.4 Depth of cut indicator
- 35 8.5 Water tank
- 35 8.6 Parking brake
- 36 8.7 Assembling the cutting blade
- 36 Checking a new cutting blade
- 36 Proceed as follows for the assembly of the cutting blade
- 37 8.8 Disassembling the cutting blade
- 37 Proceed as follows for the disassembly of the cutting blade
- 38 8.9 Checking the motor before starting
- 38 Engine oil
- 38 Air cleaner
- 39 8.10 Starting the engine
- 40 8.11 Operating the engine
- 41 8.12 Turning off the engine
- 42 9.1 Maintenance schedule
- 43 9.2 Checking engine oil level
- 44 9.3 Changing the engine oil
- 45 9.4 Cleaning the air cleaner
- 45 9.5 Cleaning the filter cup
- 46 9.6 Idle setting
- 47 9.7 Tightening the belt
- 48 9.8 Changing the belt
- 49 9.9 Checking the spark plug
- 50 10.1 Parking brake
- 53 12.1 BFS
- 55 12.2 BFS
- 57 12.3 BFS
- 59 12.4 BFS
- 61 12.5 Combustion engine