Zone sensor options. Trane Tracer ZN511, Tracer ZN521
Add to My manuals12 Pages
Trane Tracer ZN511 is a digital zone controller that provides control of fan coils and water-source heat pumps. It can be used for stand-alone or networked building automation. Some of the key features include automatic heat/cool mode determination, occupied and unoccupied operation, random start, warm-up and cool-down, manual output test, peer-to-peer communication, interoperability, continuous fan or fan-cycling operation, equipment protection, timed override, fan status, and filter maintenance.
advertisement
Zone sensor options
Zone sensors are available in a variety of configurations. Table 1 describes Trane zone sensors available for Tracer zone controllers. Figure 4 shows three types of zone sensors for the Tracer ZN511 and ZN521 zone controllers.
Table 1: Trane zone sensor options
BAS order number
4190 1087
4190 1088
4190 1090
4190 1094
4190 1095
4190 1115
4190 1116
4190 1117
Use
Any
Any
Heat pump
Heat pump
Unit vent
Fan coil
Unit vent
Any
Fan Zone
High Med Low Auto x x x x x x x x x x x x x x
Off
Setpoint thumbwheel
Temperature sensor x x x x x x x x x x x x x x
Figure 4: Zone sensors compatible with Tracer zone controllers
x x x x
Timed override buttons
On Cancel x x x x x x x x
Comm jack x x x x x x x
10 BAS-PRC006-EN
advertisement
Related manuals
advertisement