3 Product information. Bischoff & Bischoff Ladegerät Filon Futur Eng

3 Product information

3.1 Description of the product and its function

The charger is exclusively intended for charging batteries. Depending on the preset charging program, only the respective batteries may be charged.

The charger includes the following:

- at least one controllable, high frequency clocked power unit,

- microprocessor controlled charging electronics,

- an operating and display unit with pause button (depending on the model with max. four luminous elements (LED)).

The customer-specific charging program for the respective battery type is preset at the factory. The individual components of the charger are installed in a stable steel sheet housing. The charger is connected to the mains via a power cable and plug. An integral plug for non-heating devices can be installed optionally.

Charging cables can be equipped with a battery-specific charging plug for the battery connection.

3.2 Type designation

The chargers are available in various designs. An example of an itemised type designation (for a

24V/30A charger) is given below:

Type

: AC 230 DC 24/30 B-50 FP O

Options (e.g. onboard)

Device designation

Output current

Output voltage

– FILON FUTUR

Type of output current ‘DC‘ – Direct current

Nominal input voltage

Type of input current ‘AC‘ – Single-phase alternating current



Detailed technical data can be found on the type plate attached to the charger as well as in the appendix (refer to sections “Markings and signs on the charger” and “Technical data“).

3 Product information 13