8.3 Functional features. Ascon tecnologic E30
Add to My manuals12 Pages
Ascon Tecnologic E30 is a digital electronic temperature controller with defrosting function that can be typically used in cooling applications with ON/OFF temperature control and defrost control with intervals time by stopping the compressor. It has 1 relay output and 2 NTC temperature probes inputs, one of which can be configured as a digital input. It offers features like fast set point programming, customizable mode parameter programming, keyboard lock function, temperature alarms, external alarm from digital input, and open door alarm.
advertisement
8.3 Functional features
Temperature Control: ON/OFF mode;
Defrost control: Interval cycles by stopping compressor;
Measurement range: NTC: -50 ÷ +109°C/-58 ÷ +228°F;
Display resolution: 1° or 0.1° (range -99.9 ÷ +99.9°);
Overall accuracy: ±(0.5% fs + 1 digit);
Sampling rate: 130 ms;
Display: 3 Digit Red (Blue optional), height 17.7 mm;
Software class and structure: Class A;
Compliance: Directive 2004/108/CE (EN55022: class B;
EN61000-4-2: 8kV air, 4kV cont.; EN61000-4-3: 10V/m;
EN61000-4-4: 2kV supply and relay outputs, 1kV inputs;
EN61000-4-5: supply 2kV com. mode, 1 kV\diff. mode;
EN61000-4-6: 3V),
Directive 2006/95/CE (EN 60730-1, EN 60730-2-9),
Control 37/2005/CE (EN13485 air, S, A, 2, -50°C +90°C with probe NTC 103AT11).
9. INSTRUMENT ORDERING CODE
MODEL
e30 - = Instrument with mechanical keyboard
a: POWER SUPPLY
D = 230 VAC
C = 115 VAC
b: OUTPUT 1 (OUT 1)
R = Out1 Relay SPST-NO 30A-AC1 (for resistive loads)
c: TERMINALS
V = Screw terminals (standard)
E = Complete removable screw terminals
N = R emovable screw terminals (fixed part only)
d: DISPLAY
I = Red (standard)
C = Blue
e30 a b c d e f g hh ii
e, f, g:
RESERVED CODES; hh, ii: SPECIAL CODES
Ascon Tecnologic - e30 - OPERATING INSTRUCTIONS - PAG. 11
Ascon Tecnologic - e30 - OPERATING INSTRUCTIONS - PAG. 12
advertisement
Related manuals
advertisement
Table of contents
- 1 1. Instrument description
- 1 1.1 General description
- 2 1.2 Front panel pescription
- 2 2. Programming
- 2 2.1 Fast Set point programming
- 2 2.2 Standard mode parameters programming
- 3 2.3 Parameter protection using the password
- 3 (parameters programming level)
- 3 2.5 Reset parameters to default value
- 3 2.6 Keyboard lock function
- 4 3. Usage warnings
- 4 3.1 Admitted use
- 4 4. Installation warnings
- 4 4.1 Mechanical mounting
- 4 mounting [mm]
- 4 4.2 Electrical connections
- 4 4.2.1 Electrical wiring diagram
- 5 5. Functions
- 5 5.1 ON/Stand-by function
- 5 5.2 Normal and economic operation
- 5 5.2.1 Normal/Economic operation selection
- 5 5.3 Measure and display configuration
- 6 5.4 Digital input configuration
- 6 5.5 Temperature control
- 6 5.6 Compressor protection function and power-on delay
- 7 5.7 Defrost control
- 7 5.7.1 Manual defrost
- 7 5.7.2 Display lock during Defrosting
- 7 5.8 Alarm functions
- 7 5.8.1 Temperature alarms
- 8 5.8.2 External alarm from digital input
- 8 5.8.3 Open door alarm
- 8 5.10 Parameters configuration by “A
- 9 6. Programmable parameters table
- 10 7. Problems, maintenance and warranty
- 10 7.1 Notifications
- 10 7.1.1 Error messages
- 10 7.1.2 Other messages
- 10 7.2 Cleaning
- 10 7.3 Warranty and Repairs
- 10 7.4 Disposal
- 10 8. Technical data
- 10 8.1 Electrical characteristics
- 10 8.2 Mechanical characteristics
- 11 8.3 Functional features
- 11 9. Instrument ordering code