2. In the Create New Online Printer dialog box, type a name for the online printer and click OK.
3. On the Odin Editor Tools tab, click the Printer Selection button.
4. Complete one of the following substeps.
To enable local printing for generated bundles, in the Printer Selection dialog box, select a local printer and click OK.
To forward the generated bundles to Odin without local printing, in the Printer Selection dialog box, select a non-physical printer, such as Microsoft XPS Document Writer, and click OK.
4. In the Object Inspector pane, modify the properties of the printer .
5. Optional. To prevent physical printing caused by Odin processing, in the Object Inspector pane, assign an empty script to the OnPrint event.
6. On the Odin Editor Tools tab, click the Tray button.
7. In the Add Tray dialog box, type a name for the tray and click OK.
8. In the Object Inspector pane, modify the properties of the tray .
Outsourcing Printers
About outsourcing printers
Outsourcing printers enable you to print a print stream to a physical printer driver through the
OdinStreamPrint component (outsourcing print) and to define "virtual" tray names needed to convert streams with the OdinConvert component.
Create an outsourcing printer
You must have an Odin license installed to create outsourcing printers.
To create an outsourcing printer, complete the following steps.
1. In the bottom pane of the Navigator, right-click and click New > Outsourcing Printer.
2. In the Create New Outsourcing Printer dialog box, type a name for the outsourcing printer and click OK.
3. On the Odin Editor Tools tab, click the Printer Selection button.
4. In the Printer Selection dialog box, select a printer and click OK.
5. In the Object Inspector pane, modify the properties of the printer .
6. On the Odin Editor Tools tab, click the Tray button.
Note During streaming, the virtual tray names in the stream file are defined at the document level.
These are mapped to the actual trays of the respective output format or target printer in the corresponding (Compart-)Profile, when the stream is converted.
7. In the Add Tray dialog box, type a name for the tray and click OK.
8. In the Object Inspector pane, modify the properties of the tray .
Note All available forms display in the bottom pane of the Editor window.
173
