GB
The blade (4) has to be reversed regularly after a working time of approximately 10 hours in order to ensure even wear.
1. Switch off the saw and pull out the power plug (18).
2. Remove the sprocket chain wheel covering (15), the saw chain (5) and the chain bar (4).
3. Put the sword (4) front and rotate it on the back. Loosen the fixation screw (28) and remove the tensioning plate (24).
4. Attach the tensioning plate (24) with the fixing screw (28) from the other side to the sword (4).
This, make sure that the clamping screw bolt (29) is down. The round nose (24a) the clamping screw sprocket must point in the direction.
F
5. Mount chain bar (4), chainsaw
(5) and sprocket chain wheel covering (15) and tighten the chainsaw.
Waste disposal and environmental protection
Do not dispose of used oil in the sewage system or drains. Dispose of used oil in an environmentally correct manner - bring it to a waste disposal center.
Be environmentally friendly. Return the tool, accessories and packaging to a recycling centre when you have finished with them.
Machines do not belong with domestic waste.
Empty the oil tank carefully and hand in your electric chainsaw at a disposal center.
The plastic and metal parts employed can be separated out and thus recycled use can be implemented. Ask our Service-
Center for details.
Replacement parts/Accessories
Spare parts and accessories can be obtained at www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone (see
“Service-Center” Page 52). Please have the order number mentioned below ready .
Oil filler cap ..........................................................................................9110 1937
Saw chain Oregon 91P057X ..................................................................3009 1570
Saw chain Oregon 91VXL .......................................................................3009 1598
Chain bar .............................................................................................3010 0420
Bio chain oil 1 liter .................................................................................3023 0001
Bio chain oil 5 liter .................................................................................3023 0002
The Oregon replacement saw chain is to be used only in conjunction with the associated Oregon blade and the electric chainsaw approved for this. There is a risk of injury.
49