advertisement
5 Functions and settings
5.2.5
Connecting
You can establish the connection to the device using the "Connection" button in the toolbar or using the menu bar.
Proceed as follows to establish the connection using the menu bar:
1. Device > Connect
Or using the toolbar:
1. Select the "Connection with device" button.
Figure 44 Menu bar and toolbar - connect
The "Select communication" dialog box opens.
Figure 45 Dialog box - select communication
© Maschinenfabrik Reinhausen 2010
2226825/00 EN TAPCON
®
-trol
63
5 Functions and settings
A connection can be established if you have correctly undertaken the communication settings and if you know the device communication options:
2. Select the "Connect" button.
The connection to the device is established.
Once you have installed the software, the "Automatic baud rate selection" is activated for communication. COM1 has been preselected as the communication interface. You can however change the settings at any time.
Using the automatic speed query, starting at 115,200 bauds, the PC software tries to query all possible speeds down to 9600 bauds without you needing to know the baud rate set on the TAPCON
®
250. The baud rate currently set is saved within the software and used as a guideline for active "Automatic baud rate selection". This guideline is extended if the connection does not come about using the speed search described. The following window ("Connect...") opens:
Figure 46 Window - connecting
Once the baud rate has been established, the visualization software automatically initiates querying of the device data.
64
TAPCON
®
-trol 2226825/00 EN
© Maschinenfabrik Reinhausen 2010
5 Functions and settings
If the visualization has connected with a device, you receive status information
1 2 3 4
1
2
3
4
5
Figure 47 Status information about the device
Connection exists (yes/no)
Enter password (yes/no)
Last 4 digits of serial number of TAPCON
®
250
LED status indicator (if there is a connection)
Current level
5
© Maschinenfabrik Reinhausen 2010
2226825/00 EN TAPCON
®
-trol
65
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 13 Introduction
- 13 Manufacturer
- 13 Subject to change
- 13 Completeness
- 14 Supporting documentation
- 14 Storage site
- 14 Illustration conventions
- 15 Abbreviations used
- 16 Information concept
- 16 Typographic conventions
- 17 Installation
- 17 Typical installation
- 18 Custom installation
- 20 Selecting device
- 23 Product description
- 23 Scope of delivery
- 24 Basic tasks of visualization software
- 26 Description of basic structure
- 27 Description of toolbar
- 29 Basic settings
- 29 Selecting language
- 30 Menu item: Settings
- 30 Setting communication options
- 39 Other settings
- 43 Functions and settings
- 43 Menu item: Group
- 43 Inserting groups
- 46 Opening group
- 48 Deleting group
- 50 Saving group data
- 52 Menu item: Device
- 53 Creating new device
- 56 Opening device
- 60 Deleting device
- 61 Archiving device data
- 63 Connecting
- 66 Setting time on device
- 68 Changing device data
- 69 Changing parameter information
- 70 Menu item: Parameter set
- 70 Cutting
- 71 Copying
- 72 Pasting
- 72 Deleting
- 73 Downloading/updatingparameters
- 75 Uploading parameters
- 77 Parameter and data structure of visualization
- 78 Parameter groups
- 79 Parameters
- 80 Modules
- 81 Basic functions
- 84 250 Short-term memory
- 84 Display data archive
- 87 Peak/Demand
- 88 250 Measurement archive
- 88 Event data
- 89 Average value data
- 91 Reading event data
- 92 Reading average value memory
- 93 Event/measured value overview
- 95 Remote
- 96 Description of further menu structure
- 96 Menu: File
- 100 Menu: View
- 102 Menu: Tools
- 109 Troubleshooting