Operating environment and configuration. Eiki LC-XB43N, LC-XB42N
Add to My manuals150 Pages
Eiki LC-XB42N has a wide range of powerful features to help you control your device in different ways. Some of them are: Wired and Wireless LAN, Network Capture, Network Viewer, Moderator Function, and USB Display. With such a wide range of features, it is essential to understand how to use them effectively. Please read the manual thoroughly to get the most out of your Eiki LC-XB42N device.
advertisement
Operating environment and configuration Required operating environment for computers
When operating the projector via the networks, computers should meet the operating environment below.
OS CPU Memory Free HDD Space Screen Resolution Communication Protocol Wireless LAN Network Correspond Wired LAN Browser Application Microsoft Windows 2000 or Microsoft Windows XP or Microsoft Windows Vista (32bit version) Pentium 3 ; 1GHz or higher (more than 2GHz is recommended) for Windows 2000 or Windows XP Pentium 4 ; 3GHz or higher for Windows Vista 256MB or more for Windows 2000 or Windows XP 1GB or more for Windows Vista 100MB Required to support any of VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), The color number should be either 16 bit (65536 colors) or 24/32 bit (16.77 million colors).
TCP/IP Correspond to IEEE802.11b/g/n Correspond to 100BASE-TX (100Mbps) /10BASE-T (10Mbps) Microsoft Internet Explorer Ver.4.0 or later Netscape Communications Netscape Communicator Ver.6.0 or later
Network specifications of the projector
LAN Terminal Data communication speed Protocol Wireless LAN Interface 100Base-TX (100Mbps)/10Base-T (10Mbps) TCP/IP Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area IEEE802.11b/g/n AdHoc, Infrastructure 1/2/5.5/11Mbps (IEEE802.11b) 6/9/12/18/24/36/48/54Mbps (IEEE802.11g) Max speed 150Mbps (IEEE802.11n) 2412MHz–2462MHz (CH1–CH11) IEEE802.11g OFDM 54/48Mbps 64QAM, 36/24Mbps 16QAM, 18/12Mbps QPSK, 9/6Mbps BPSK IEEE802.11b DSSS 11/5Mbps CCK, 2Mbps DQPSK, 1Mbps DBPSK IEEE802.11n OFDM TCP/IP WPS Push Button, WPS PIN code, WEP 64Bit (Open/ Shared) /WEP 128Bit (Open/Shared), WPA-PSK(TKIP), WPA2-PSK(AES), SSID, ESSID about 30 m (without disturbance) Differs according to the operating environment.
Compliance Countries and Standards JAPAN: VCCI ClassB,TELEC (Wireless) USA: FCC Part15 Subpart C (Wireless) FCC Part15 Subpart C, Class B Canada: IC RSS-210 (Wireless), IC ICES-003 ClassB Europe: R&TTE, EMC, LVD The wireless LAN can be used in the following countries and regions. There are restrictions on channels and frequencies in the countries and regions at which you can use the wireless communication.
Austria / Belgium / Bulgaria / Cyprus / Czech / Denmark / Estonia / Finland / France* / Germany / Greece / Hungary / Iceland / Ireland / Italy / Lithuania / Latvia / Liechtenstein / Luxembourg / Malta /Poland / Portugal / Norway / Netherlands / Romania / Slovakia / Slovenia / Spain / Sweden / Switzerland / Turkey / U.K.
* Outdoor use limited to 10mW eirp within the band 2454 - 2483.5MHz.
advertisement
Key Features
- Wired and Wireless LAN Connectivity
- Network Capture and Viewer
- Moderator Function
- USB Display
Related manuals
Frequently Answers and Questions
What is the purpose of the Moderator Function?
How do I use the Network Capture feature?
What is the USB Display feature?
advertisement
Table of contents
- 2 Compliance
- 4 Safety instructions
- 5 Table of contents
- 8 Operating environment and configuration
- 8 Required operating environment for computers
- 9 Network specifications of the projector
- 10 Useful guide to the network function
- 11 1. About LAN functions
- 12 LAN functions and the features
- 12 Image projecting system via LAN
- 13 An example of the connection
- 14 LAN connection modes
- 17 2. Setup procedures
- 19 Installing the software
- 23 3. Names and functions of the operation screen
- 24 Network connection standby display
- 25 Network Capture 5 window
- 27 4. Wired LAN configurations
- 28 Connecting to the LAN line
- 28 Network environment settings
- 30 Confirming the operation
- 32 Network PIN code
- 32 Network information
- 33 Wired factory default
- 33 Wired LAN factory default settings
- 34 USB Display
- 35 5. Wireless LAN configurations
- 36 Setting the network environment
- 36 Setting procedures
- 38 Configuring security with the projector
- 43 Easy wireless setting
- 44 Network PIN code
- 44 Network information
- 44 Wireless factory default
- 45 WIRELESS indicator display
- 46 Wireless LAN factory default settings
- 47 6. Basic setting and operation
- 48 Starting up the Browser
- 50 How to use the setting page
- 52 Initial setting
- 55 Network configuration
- 57 Configuring wireless LAN setting and security setting
- 60 E-mail setting
- 64 SNMP setting
- 67 7. Controlling the projector
- 68 Power control and status check
- 70 Controls
- 74 PC adjustment
- 75 Setting up the projector
- 78 Timer setting
- 81 Projector information
- 83 Multi-control
- 89 8. Network capture functions
- 90 About Network Capture function
- 93 Using the Real Time Capture
- 98 Using the Network Communication
- 102 How to use the Network communication
- 105 Network Communication operation and change of state
- 106 Executing the forcing mode
- 107 Moderator function
- 108 Preparation for using the moderator function
- 109 Using the moderator function
- 110 Moderator's password setting up
- 110 Unregister moderator status
- 111 Error information
- 113 9. Network Viewer functions
- 114 Creating the available data [Network Viewer 5]
- 119 Creating a program file [Program Editor]
- 124 Using the Network Viewer function
- 130 Use of the projector as FTP server
- 133 10. Appendix
- 134 Use of telnet
- 136 Web browser setting
- 141 Firewall setting
- 142 Troubleshooting
- 148 Terminology