advertisement
ENR-1100 System Administrator’s Manual
Schedule Recordings
Unlike the traditional analog surveillance system, the IP surveillance system provides a target-oriented recording schedule for devices; the view of each device can be recorded based on your required time segments and event types. For example, you may have a camera installed on the office ceiling do continuous recording during work hours, and record only upon the triggers (incidents that detected by system) at night. In this way, the system does not waste disk space storing meaningless parts, and you save lots of effort browsing playback for specific events.
For the recording schedule, ENR supports Schedule recording, Event recording and
Event Speed-up Recording modes, which are set up on a week-based timetable; the event-handling schedule is configured here.
On ENR, you can configure camera
’s recording schedule on 7 days / 24 hours basis. The schedule is split into segments of one-hour-length. By default, once a device is added to the system, its schedule is automatically set to full-time schedule recording and event handling.
You should configure it according to your system plan. On Live screen Select Setup click
“Schedule” tab and select one channel.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Trademarks
- 3 Regulatory Compliance Information
- 4 Target Audience
- 4 Technical Support
- 9 Product Overview
- 9 ENR Server / Client Architecture
- 10 Remote Client PC Requirements
- 11 What’s in the Box
- 12 At A Glance
- 12 Front Panel
- 12 Rear Panel
- 13 Power Button & Reset Button
- 13 Turn On the Device
- 13 Turn Off the Device
- 14 Reset to Factory Default
- 14 LED Indicators
- 15 Prepare the Devices
- 15 Cameras
- 16 Monitor
- 16 USB mouse & Keyboard
- 16 USB Mass Storage Device
- 16 Hard Disks
- 17 Install the Hard Disks
- 17 Step 1 Remove the Case Cover
- 17 Step 2 Install Disk SATA
- 18 Step 3 Install Disk SATA
- 18 Step 4 Install the Case Cover Back
- 19 Network Connection Architecture
- 19 LAN 1 Port
- 19 Connection Setting Example
- 20 LAN 2 Port
- 20 Connection Setting Example
- 21 Connect the Devices
- 22 Quick Setup
- 22 Step 1: Log in to ENR
- 23 Step 2: Format the Hard Disks
- 23 Step 3: Add Cameras
- 24 Log In/ Out ENR
- 24 Log In
- 25 Live Page UI Overview
- 26 Input Devices
- 26 Keyboard
- 27 Mouse Settings
- 27 Software Keyboard Settings
- 28 Set Cameras
- 28 Add Cameras
- 30 Search
- 32 Copy Camera Settings
- 33 Delete Cameras
- 33 Change Camera Settings
- 35 Configure PTZ Preset Points
- 37 Network Settings
- 37 Configure LAN1 Settings
- 38 Configure LAN2 Settings
- 38 Set the Port
- 39 Date & Time
- 39 Setup Manually
- 39 Synchronize with Time Zone
- 40 Email Settings
- 42 Disk Management
- 42 Storage Device Types
- 43 Format Hard Disks
- 44 Schedule Recordings
- 45 Event-Recording File Length
- 45 Set the Recording Schedule
- 46 Set the Event Schedule
- 46 Copy Schedule
- 47 Event Management
- 47 Event-Handling Schedule
- 49 Setup Event Rules
- 51 Clear Event Rules
- 52 Copy Event Rules
- 53 User Group Management
- 53 Add a Group
- 54 Edit / Delete a Group
- 54 Add a User
- 55 Edit / Delete a User
- 56 Upgrade Firmware
- 57 Backup / Restore Settings
- 57 Backup
- 58 Restore
- 59 Customize Live Screen Layout
- 59 Change Channel Position
- 59 Change Layout
- 60 Execute Sequence Patrol