User manual

5 Listen to the radio

Tip

•

Position the antenna as far as possible from TV or other radiation sources.

•

Make sure that you have connected the supplied FM antenna.

•

For optimal reception, fully extend and adjust the position of the antenna.

Listen to DAB+ radio

Digital Audio Broadcasting (DAB+) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality, and more information.

Tune to DAB+ radio stations

Note

•

Make sure that the antenna is fully extended.

1

Press DAB/FM repeatedly to select the

DAB source.

»

[FULL SCAN] (full scan) is displayed.

2

Press OK to start full scan.

» The unit stores all DAB+ radio stations automatically and broadcasts the first available station.

» The station list is memorized in the unit. Next time when you turn on the unit, the station scan does not take place.

Note

•

If no DAB+ radio station is found, [NO DAB] (no

DAB) is displayed, then [FULL SCAN] (full scan) is displayed again.

To tune to a station from the available station list:

In DAB+ mode, press / repeatedly to navigate through the available DAB+ stations.

Store DAB+ radio stations automatically

Note

•

New stations and services will be added in DAB+ broadcast from time to time. To make new DAB+ stations and services available, perform full scan regularly.

1

In DAB+ mode, press and hold

CLOCK/SCAN for more than 3 seconds.

» The unit scans and stores all the available DAB+ radio stations, and broadcasts the first available station.

2

Press / to select an automatically stored station.

Store DAB+ radio stations manually

Note

•

You can store a maximum of 20 preset DAB+ radio stations.

1

Tune to a DAB+ radio station.

2

Press PROG to activate the storing mode.

3

Press ALBUM/PRESET / to select a preset number.

4

Press PROG to confirm.

» The name of the preset station is displayed.

5

Repeat the above steps to store more

DAB+ stations.

12 EN