DayMark 9700 Training Manual Click Here

1. iNtroDUciNg yoUr Daymark 9700 1. iNtroDUciNg yoUr Daymark 9700

4. Slide the printer mechanism carefully out of the terminal.

5. Replacement printer mechanism plugs directly into the unit.

loaDiNg laBels iNto termiNal

1. Grasp the sides of the display, then pull and lift upward.

5.

1. iNtroDUciNg yoUr Daymark 9700

2. Grab blue plastic lock and slide left until the metal top opens.

3. DayMark and DayMark approved labels can then be placed into the label roll bucket.

The label stock should be coming off the top of the roll.

5. Place label stock under the sensor arm in printer mechanism as shown above. Be sure that the sensor is positioned directly over a label rather than the web (gap) between labels, leaving three or four labels in front of printer mechanism.

6.

1. iNtroDUciNg yoUr Daymark 9700