Binary Tree Documentation
Section 11: Verifying Autodiscover, BTAvailability, and
BTRouter
11.1 Autodiscover
1. From the Command Prompt window on the Windows Coexistence server, navigate to %Program
Files%\BinaryTree\CMT for Coexistence <version>Exchange\ and ensure that the following files are installed o Autodiscover, AvailabilityService, and AvailabilityRouter folders are created in the C:\Program
Files\BinaryTree\CMT for Coexistence <version> folder. o Connections.config exists in the Autodiscover, AvailabilityService, and AvailabilityRouter folders exist under C:\Program Files\BinaryTree\CMT for Coexistence <version>.
If web.2010.config exists, rename it to web.config. Unless you are running Exchange
2007, then rename web.2007 to web.config.
2. Verify that web.config and connections.config are writable (not Read-Only).
3. Open the IIS Administrator.
4. Navigate to the Default Web Site.
5. Refresh IIS (press <F5>) and verify that Autodiscover virtual application has been added.
6. Next, select the Autodiscover application in the left pane.
7. Double-click Authentication in the right pane. o Verify that Basic Authentication and Windows Authentication are enabled. o If not, enable them. o Click the Back button.
8. Double-click Connection Strings in the right pane. o Verify that the URL of the EAD value is: https://<Exchange CAS Server
FQDN>/Autodiscover/Autodiscover.xml o Correct the machine name if incorrect. o Click the Back button.
9. Double-click Application Settings. o Verify that ExchangeVersion is set to 2010 for all versions of Exchange except 2007 o If you require credentials to access the Active Directory environment see Appendix L: SetFBCred
Utility. o Verify that Autodiscover is set to .\Autodiscover.xsl.
10. Create a map entry for the Domino SMTP domain name for which you would like to expose Free/Bu sy information. The entry should look like: o MAP:@domino.contoso.com = contoso.com. o This ensures that all requests that go through to Domino use the SMTP domain contoso.com rather than domino.contoso.com. o Multiple map entries, such as the foll owing are also perfectly valid. In this case, both SMTP domains would be mapped to contoso.com. o MAP:@domino.contoso.com = contoso.com
Notes Integration | CMT BTCal 5.5 User Guide
BTCal 5.5
85
Binary Tree Documentation o MAP:@domino.spintoptoys.com = contoso.com
11. Optional log settings: o LogAllRequests = False o Log path = c:\log\autodiscover (must be an existing directory, create if needed)
12. If any of the above resulted in changes to the application, run the iisreset command in the Command
Prompt window.
13. Verify that the application is up and running.
14. Open IE and navigate to the following virtual directory:
https://autodiscover.domino.contoso.co m/Autodiscover/Au todiscover.asmx
(Ensure that you are using the same machine name as the SSL certificate issued to the property, and that it matches the Autodiscover.<dominoSMTPdomain> specified above).
15. A web page with a blue header that reads BT Autodiscovery Service for Exchange 2010 Web Services should appear.
16. Click BT_GetConfiguration.
17. Click Invoke.
18. An XML response with the correct endpoint for this machine should display in the browser.
19. Click Back.
20. Click BT_TestAutoDiscovery.
21. Enter the e-mail address of a Domino user with the same domain as previously entered (for example,
[email protected]).
22. Click Invoke.
23. A properly formatted Autodiscover XML document should appear, showing the correct URL to the
BTRouter application.
11.2 BTAvailability
1. From the Command Prompt window, navigate to %Program Files%\BinaryTree\CMT for Coexistence
<version> Exchange\ AvailabilityService.
Verify that the folders and files mentioned above are present.
If web.2010.config exists, rename it to web.config. Unless you are running Exchange
2007, then rename web.2007 to web.config.
2. Verify that web.config and connections.config are writable (not Read-Only).
3. Open the IIS Administrator.
4. Navigate to the Default Web Site.
5. Refresh IIS (press <F5>) and verify that the BTAvailability virtual application has been added.
6. Next, select the BTAvailability application in the left pane.
7. Double-click Authentication in the right pane.
Notes Integration | CMT BTCal 5.5 User Guide
BTCal 5.5
86
Binary Tree Documentation o Verify that Basic Authentication and Windows Authentication are enabled. o If not, enable them. o Click the Back button.
8. Double-click Connection Strings in the right pane. o Verify that the URL of the EWS value is https://<Exchange CAS Server
FQDN>/EWS/Exchange.asmx. o If the machine name is incorrect, correct it. o Click the Back button.
9. Double-click Application Settings. o Verify that Exchange Version is set to 2010 for all versions of Exchange except 2007 o If you require credentials to access the exchange environment see Appendix L: SetFBCred Utility.
10. Optional log settings: o LogAllRequests = False o Log path = c:\log\availability (must be an existing directory, create if needed)
11. If any of the above resulted in changes to the application, run the iisreset command in the Command
Prompt window.
12. Verify that the application is up and running.
13. Open IE and navigate to the following virtual directory: https:// autodiscover.domino.contoso.com/BTAvailability/Availability.asmx
(Ensure that you are using the same hostname as the SSL certificate issued to the property, and that it matches the Autodiscover.<dominoSMTPdomain> specified above).
You should see a webpage with a blue header that reads BT Availability Service for Exchange Web
Services.
14. Click GetConfiguration.
15. Click Invoke.
16. An XML response with the correct endpoint for this machine should display in the browser.
17. Click Back.
18. Click BT_TestConnectivity.
19. Add two e-mail addresses of valid Exchange mailbox users (for example, [email protected],
[email protected]).
20. Click Invoke.
21. You should see two string representations of the Free/Busy stream for each user for the current date.
11.3 BTRouter
1. From the Command Prompt window, navigate to %Program Files%\BinaryTree\CMT for Coexistence
<version> Exchange\AvailabilityRouter.
2. Verify that the files mentioned above are present.
Notes Integration | CMT BTCal 5.5 User Guide
BTCal 5.5
87
Binary Tree Documentation
If web.2010.config exists, rename it to web.config. Unless you are running Exchange
2007, then rename web.2007 to web.config. If Exchange.2010.asmx exists, rename it to Exchange.asmx.
3. Verify that web.config and connections.config are writable (not Read-Only).
4. Open IIS Administrator.
5. Navigate to the Default Web Site.
6. Refresh IIS (press <F5>) and verify that the BTRouter virtual application has been added.
7. Select the BTRouter application in the left pane.
8. Double-click Authentication. o Verify that Basic Authentication and Windows Authentication are enabled. o If not, enable them. o Click the Back button.
9. Double-click Connection Strings. o Verify that the URL of the EWS value is https://<Exchange CAS Server
FQDN>/EWS/Exchange.asmx. o Verify that the URL of the BTAS-NOTES value is pointing to the BT Domino Availability Service URL
(for example, https://<FQDN of the Domino Web service>/BTAvailability). o Click the Back button.
10. Double-click Application Settings. o Verify that ExchangeVersion is set to 2010 for all versions of Exchange except 2007 o If you require credentials to access the domino environment see Appendix L: SetFBCred Utility.
11. Optional log settings: o LogAllRequests = False o Log path = c:\log\btrouter (must be an existing directory, create if needed)
12. If any of the above resulted in changes to the application, type the iisreset command in the Command
Prompt window.
13. Verify that the application is up and running.
14. Open IE and navigate to the following virtual directory: https:// autodiscover.domino.contoso.com
/BTRouter/Exchange.asmx
Ensure that you are using the same hostname as specified in the SSL certificate Issued To property. You should see a webpage with a blue header that reads BT Availability Router for Exchange Web Services
2010.
15. Click BT_GetConfiguration.
16. Click Invoke.
17. You should get an XML response with the correct endpoint for this machine. o If UNREACHABLE appears under the Domino endpoint URL, verify the Domino Availability Service endpoint. You shoul d be able to reach the Domino service endpoint using the browser. o Return to Application Settings in IIS and update the endpoint with the proper URL.
Notes Integration | CMT BTCal 5.5 User Guide
BTCal 5.5
88
Binary Tree Documentation
18. Click Back.
19. Click BT_TestConnectivity.
20. Enter two e-mail addresses for valid Domino users (for example, [email protected] and [email protected]).
21. Click Invoke. You should see a string representation the Free/Busy stream for each user for the current day.
Notes Integration | CMT BTCal 5.5 User Guide
BTCal 5.5
89
