5-3 Manual Datalogger ( Set sampling time = 0 second ). Lutron Electronics VB-8206SD

b. Pause the datalogger

During execute the Datalogger function , if press the

" Logger Button " ( 3-6, Fig. 1 ) once will pause the

Datalogger function ( stop to save the measuring data into the memory circuit temporally ). In the same time the text of " REC " will stop flashing.

Remark :

If press the " Logger Button " ( 3-6, Fig. 1 ) once again will execute the Datalogger again, the text of " REC " will flashing .

c. Finish the Datalogger

During pause the Datalogger, press the " REC Button " (

3-4, Fig. 1) continuously at least two seconds, the " REC " indication will be disappeared and finish the Datalogger.

5-3 Manual Datalogger ( Set sampling time = 0 second )

a. Set sampling time is to 0 second

Press the " REC Button ( 3-4, Fig. 1 ) once , the LCD will show the text " REC ", then press the " Logger Button " (

3-6, Fig. 1 ) once, the " REC " will flashing once and Beeper will sound once, at the same time the measuring data along the time information will be saved into the memory circuit. The lower Display will show the

Position ( Location ) no. and saved into the SD card too.

16