- Industrial & lab equipment
- Measuring, testing & control
- Lutron Electronics
- VB-8206SD
- Operation manual
7-1 Set clock time ( Year/Month/Date, Hour/Minute/ Second ). Lutron Electronics VB-8206SD
Add to my manuals
31 Pages
advertisement
Remark :
During execute the " Advanced Setting " function, if press " Esc Button " ( 3-2, Fig. 1 ) once will exit the " Advanced Setting " function, the LCD will return to normal screen.
7-1 Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
When the lower display show " dAtE "
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
▲ ▼
( 3-5, Fig. 1 ) to adjust the value ( Setting start from
Year value ). After the desired value is set, press the
" Enter Button " ( 3-4, Fig. 1 ) once will going to next value adjustment ( for example, first setting value is Year then next to adjust Month, Date, Hour,
2)After set all the time value ( Year, Month, Date, Hour,
Minute, Second ), the screen will jump to " Decimal point of SD card " setting screen ( Chapter 7-2 ).
Remark :
After the time value is setting, the internal clock will run precisely even Power off if the battery is under normal condition ( No low battery power ).
21
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 10 3-1 Display
- 10 3-2 Power Button ( ESC, Backlight Button )
- 10 3-3 Hold Button ( Function Button, Next Button )
- 10 3-4 REC Button ( Enter Button, Unit Button )
- 10 Max hold reset Button )
- 10 3-7 BNC Input Socket
- 10 3-8 SD Card Socket
- 10 3-9 RS-232 Output Terminal
- 10 3-10 Reset Button
- 10 3-11 DC 9V Power Adapter Input Socket
- 10 3-12 Battery Compartment/Cover
- 10 3-13 Battery Cover Screws
- 10 3-14 Stand
- 10 3-15 Tripod Fix Nut
- 10 3-16 Magnetic base
- 10 3-17 Vibration Sensor
- 10 3-18 Input Socket of Vibration Sensor
- 10 3-19 Mini Plug of Cable
- 10 3-20 Sensor Cable
- 10 3-21 Cable BNC Plug
- 11 4-1 Preparation
- 12 4-2 Unit selection ( Acc./Velocity/Displacement selection )
- 13 4-3 Function selection
- 14 4-4 Zero adjustment procedures
- 15 4-5 Data Hold
- 15 4-6 Data Record ( Max./ Min. reading )
- 16 4-7 LCD Backlight ON/OFF
- 16 5-1 Preparation before execute datalogger function
- 18 5-3 Manual Datalogger ( Set sampling time = 0 second )
- 19 5-4 Check time information
- 19 5-5 Check sampling time information
- 19 5-6 SD Card Data structure
- 23 7-1 Set clock time ( Year/Month/Date, Hour/Minute/ Second )
- 24 7-2 Decimal point of SD card setting
- 24 7-3 Auto power OFF management
- 25 7-4 Set beep Sound ON/OFF
- 25 7-5 Set sampling time
- 25 7-6 SD memory card format