Appendix
C
Customizing Client Installations
You can create customized installations of the Infor CRM Client and make them available to Network and Remote users to install. The user then installs Infor CRM using the custom configuration file. This feature is only supported for the Network and Remote Client installations.
Installing Infor CRM using the customized installation Infor CRM does not install third-party (prerequisite) applications. Third-party applications must be installed separately. Installations for these applications can be found in the Redist folder on the Infor CRM media.
To create a customized Client installation
1. Open a command prompt.
2.
Type the following:
“<Path to the network client setup.exe>” /a /vTARGETDIR=<path to where you want the network generated installs>
3.
In the User Account Control box, click Yes.
The Infor CRM Install Wizard screen for the component you are installing appears.
4.
Click Next.
5.
In the Administrative Install Options window, click Modify default feature set.
6.
In the Select Install Features dialog, select the features you want to install.
Features with a cleared check box next to the name will not be included in the install.
7.
Click OK and then click Next.
8.
In the Network Location box, accept the default location or click the Change button to select a different location.
The location should be one available to anyone who will be installing, as the install you are creating will be saved to the location you specify.
9.
Direct your users to the location you specified in step 8.
10. Repeat steps 2 through 9 for each of the client installations you want to create (Network and Remote).
Infor CRM Implementation Guide
123
Customizing Client Installations
124 Infor CRM Implementation Guide
