advertisement
Setting the Hotel Option Data
To Enter: Press the MUTE
→ 1 → 1 → 9 →
ENTER E buttons in order. (From the Hospitality mode, the Standalone mode is set.)
To Exit from this menu : power off and turn on again.
✎
Depending on Model and Region, some menus do not exist on the TV set.
Category
Hospitality
Mode
SI Vendor
Power On
Channel
Hotel TV Function
Item initial value
Description
Hospitality Mode
SI Vendor
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On Volume Num
Min Volume
Max Volume
Power on Source
Power On Option
Channel Setup
Channel Editor
Standalone
OFF
Last Saved
1
ATV
Last Saved
10
0
100
TV
Last Option
Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Stand-alone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek
/ Seachange / MDC / Innvne
• Standalone mode : Smoovie
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog cable band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been set when the power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
The maximum Volume Level the user can set in Stand Alone Hospitality mode.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have unplugged the TV and then plugged it in again.
• LAST OPTION : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your having to display each channel directly.
Mixed Channel Map
Dynamic SI
Channel Rescan
Message
Pan Euro MHEG
Mychannel
Genre Editor
ON
OFF
ON
OFF
OFF
...
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels at the same time.
• On: When ON, guests can access the complete Channel Map irrespective of the selected antenna type. The Channel list will also populate Air as well Cable type channels.
• Off: When OFF, guest can access the Channel Map corresponding to the selected antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected antenna type channels.
• On : Check the DTV Programme channel number. (the TV channel editor is inaccessible)
• Off: Do not check the DTV Programme channel number.
(the DTV channel editor is accessible, but additional channel Programme number update is not supported)
When there is a mismatch between the data in the channel map and the transmitted data
, the TV autotunes the channels to restore the data/parameters in the channel map.
• ON: When Channel Rescan Message is ON, The OSD showing that the channels are being rescanned will be displayed to Hotel Guests.
• OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan message OSD should not to be displayed to Hotel Guests.
• OFF: If Pan EURO MHEG is set to Off, MHEG runs according to the existing product specifications.
• ON: If Pan EURO MHEG is set to On, MHEG is ON regardless of the product specifications or region.
Enable or disable the Mychannel feature.
Edith the genre for channels. (Available when Mychannel is On)
20
English
Category
Channel
Menu OSD
Clock
Music
Mode
Remote
Jack Pack
External
Source
Hotel TV Function
Item
Subtitle Auto On
Picture Menu Lock
Menu Display
Panel Button Lock
Home Menu Display
Home Menu Editor
Home Menu Auto Start
Clock Type
Local Time
Music Mode AV
Music Mode PC
Music Mode Backlight
Priority AV
Priority PC
Priority HDMI
AV Option
HDMI Option
USB Pop-up Screen
External Source Banner
Auto Source
Anynet+ Return Source initial value
Description
OFF
OFF
ON
Unlock
ON
ON
OFF
Manual
OFF
OFF
OFF
1
2
3
This function turns the function On/Off that automatically turns on the subtitles in a specific country.
This function is supported for Hotel TVs that are ready to receive DVB broadcasts that is heading to Europe.
This function is related to France’s subtitle specification. The rest of the countries’ subtitles function according to the appropriate country specifications regardless of the Subtitle Auto On function.
• On: When the Subtitle Auto On function is ON, it follows France’s subtitle specifications.
• Off: When the Subtitle Auto On function is OFF, it does not follow France’s subtitle specifications.
Enable or disable the Picture Menu.
• On : Main Menu display.
• Off : Main Menu No display.
Turning the front panel (local key) operations on/off.
• Unlock : Unlocks all panel keys.
• Lock : Locks all panel keys.
• OnlyPower : Locks all panel keys except the Power panel key.
• Menu/Source : Locks the Menu and Source panel keys.
OFF : The Home Menu is not displayed.
ON : The Home Menu is displayed.
Edit Home Menu
ON : The Home Menu is Auto Start.
OFF : The Home Menu is not Auto Start.
OFF : No clock option of Factory menu shall work. Only Main menu.
SW Clock : SW clock shall work only.
Select the method to update the clock data.
• Manual: Use clock data from DVB channel or manual clock setting When the TV is in the stand-alone mode.
• Time Channel: Use clock data from the selected Channel type and Channel num.
To get music output from an mp3/audio player through an AV Input Source. When on, you can hear sound from the player through the TV even there is no video signal. The TV’s backlight, however, remains on. And add a video signal,it works normally.
To get music output from an mp3/audio player through a PC Input Source. When on, you can hear sound from the player through the TV even there is no video signal. The TV’s backlight, however, remains on. And add a video signal,it works normally.
Backlight On/Off option in Music mode to save energy
If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority
If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority.
If the jack priority is set, the corresponding source is automatically set when a jack is inserted according to the jack priority.
Select RJP AV Source (Source selection depends on Model).
AV
HDMI 1 Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/HDMI3)
Default
When USB is connected to the TV,
• Default : a Popup window appears.
• Automatic : This Enters the USB content menu automatically.
• Disable : Nether the pop-up window nor the menu appears.
ON
Users can set External Source Banner to On or Off.
• ON : When TV power is On or the Mode changes, the TV will displays the external source banner.
• OFF : When TV power is On or the Mode changes, the TV does not display the external source banner.
OFF
Power On
Src
• OFF : Auto Source is Off.
• ON : When an external source is connected to the TV, the TV will auto-ident and switch the input source.
• PC : Auto Ident PC Input only.
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This fuction is especially useful for the Guestlink RJP.)
English
21
Category
Bathroom
Speaker
Eco
Solution
Logo/
Message
Cloning
REACH
Solution
Network
Hotel TV Function
Item
Sub AMP Mode
Sub AMP Volume
Energy Saving
Welcome Message
Edit Welcome Message
Hospitality Logo
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
REACH Server Update Time
REACH Update Immediate
REACH Server Channel
REACH Server Version
REACH Server Group ID
REACH
Background TV Sound
TICKER
AppLite
Room Number Setting
Network Setup
SmartHub Model Setting
SmartHub Setting initial value
Description
2
6
Off
OFF
OFF
...
...
Determines the Sub AMP operation mode.
• 0: Turns the Sub AMP function off (PWM off).
• 1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On Volume, the Min
Volume, and the Max
• 2: Determines the volume according to the bathroom control panel setting.
Sub AMP Volume level at power on initial condition.
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
displays on Welcome Message.
Edit the Welcome Message.
Turns the Hospitality logo feature On or Off, if On, when the TV isturned on, the Logo is displayed, before the signal from the initial source, for the amount of time set in "Logo
Display Time"
Downloads the Hospitality logo.
Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Set the logo display time (3/5/7 Seconds).
Clone the current TV option values to a USB memory device.
Clone the saved TV option values in a USB memory device to the TV.
OFF
1hour
OFF
87
0000
All
...
OFF
OFF
…
…
When Setting Auto Initialize is set to On, and the power is turned off and on or the Master
Power is turned off and on, the data is restored to the cloned values. If there is no cloned value, even when the Setting Auto Initialize is set to On, it will be ignored and the operation will be the same as that whenSetting Auto Initialize is set to Off
Standby REACH Server will be operated, according to time setting
Make TV operate REACH Server after 1 minute in Stand-by mode.
Set the default channel for REACH Server
• None : After Auto Scan, Operate REACH Server
• Channel value : Operate REACH Server at the channel selected
Display REACH Server version of TV
Provided REACH Server ID for operating SIRCH on a specific set.
Set whether to use REACH function.
Background TV Sound On and Off
Ticker On and Off
• On : The Applite content is displayed.
• Off : The Applite content is not displayed.
• Setting Room Number.
Set an IP address to establish an Internet connection.
Set SmartHub Model.
Set up SmartHub.
22
English
Category
Widget
Solution
SERVICE
Hotel TV Function
Item
Widget Mode
Solution Type
Server URL Setting
License Server IP Setting
IPTV Mode
Virtual Standby
Instant On
Room Num Setting
Self Diagnosis for TV
Self Diagnosis for HTV
SW Upgrade
Service Pattern
Sound Bar Out
TV Reset initial value
ON
Vendor
Server
Description
Widget Mode ON/OFF.
Select type of solution (Vender Server/ SINC Server).
ON
OFF
OFF
OFF
OFF
Set server URL.
Set server IP.
IPTV mode On/Off.
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W
(Depending on the size of the TV screen).
Setup booting mode.
Set Room Number.
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen.
• Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen.
HD Function Check Menu On Executing Item Below OSD is displayed ProIdiom DTV
Channel Key Loss : Ok/Failure (Hotel US) STB SI Vendor
Setting : SI Name Ok/Failure
Bathroom AMP : Ok/Failure (Hotel EU)
RTC : Ok/Failure (Hotel EU)
PC Audio Test : Ok/Failure
PC Self Test : Ok/Failure
SW USB Update function
Same function with SVC Service Pattern.
ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
Returns all settings on the TV to their factory defaults.
English
23
¦
Welcome Message
The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room.
– Welcome message settings are found in the Hotel Option Menu.
– Welcome message should be ON in order to display the message on power-on.
Hospitality Mode
SI Vendor
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
Standalone Widget Solution
OFF Service r
Welcome Message
Edit Welcome Message
Hospitality Logo
Hospitality Logo DL
Logo Display Time
ON
OFF
...
...
– A welcome message can be up to 25 characters and it can be edited by changing the text in the Hotel Service menu.
– The following is the list of characters supported by Welcome message:
✎
Capital letters, from A-Z
– Welcome message can be edited by using the navigation, colour & enter key on the Remote in the “Edit
Welcome Message” OSD.
W E L C
Edit Welcome Message
O M E
_
A
H
O
V
P
W
B
I
Q
X
C
J
R
Y
D
K
S
Z
E
L
F
M
T
G
N
U
Move Enter
A
B
C
D
Move to left
Move to Right
Leave Black
Done
Return
– The Welcome message and hotel logo cannot both be active at the same time.
24
English
¦
Hotel Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is initially powered on.
– Hospitality Logo settings are the Hospitality mode menus.
– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
– The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has been loaded into the TV.
Hospitality Mode
SI Vendor
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
Standalone Widget Solution
OFF Service r
Welcome Message
Edit Welcome Message
Hospitality Logo
Hospitality Logo DL
Logo Display Time
OFF
BMP
5 Second
• Hospitality Logo
– This option lets you choose whether the Hospitality Logo image is displayed or not.
– Initial value is OFF.
– Can be set to OFF or ON.
– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
y
Hospitality Logo DL
– This option lets you download the logo image to the TV’s memory from a USB device.
– A wait message appears while the image is being copied to the TV.
– A "completed" message appears when the copy operation finishes successfully.
– The word "failed" appears if the copy operation was unsuccessful.
– No USB appears if no USB device is connected.
– No File appears if there is no file to copy on the USB device or or the file is in the wrong format must be a BMP file. If No File appears and there is a logo file on the USB device, check the file format.
• Logo File Format
– The TV supports only BMP and AVI format.
– The file name must be samsung.bmp or samsung.avi.
– The maximum resolution of the BMP format is 960 x 540.
– The maximum file size for AVI format is 30MB.
– The TV does not change the size or scale of the image.
English
25
¦
USB Cloning
USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
• Cloning from TV to USB: This copies stored data from the TV set to the USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order.
• MUTE
→ 1 → 1 → 9 →
ENTER
3. Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER button.
4. When the message “Clone TV to USB” is displayed, press the ENTER button.
5. You can verify USB cloning behavior.
• In Progress: during copying data to USB.
• Completed: copy was finished successfully.
• Failed: copy was not finished successfully.
• No USB: USB is not connected.
Logo/Message
Cloning d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
• Cloning from USB to TV: This to downloads the stored data in the USB device to TV set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter the Interactive menu by pressing buttons in order: MUTE
→ 1 → 1 → 9 →
ENTER
3. Press the
▲ or ▼ button to select “Clone USB to TV”, then press the
ENTER button.
Logo/Message
Cloning
Clone TV to USB
Clone USB to TV
Setting Auto Initialize d
OFF
4. When the message “Clone USB to TV” is displayed, then press the ENTER button.
5. You can Make sure USB cloning behavior.
• In Progress: copying data to TV.
• Completed: copy finished successfully.
• Failed: copy did not finish successfully.
• No USB: USB is not connected.
• No File: there is no file to copy on the USB.
✎
Activate copying from USB to TV by pressing ENTER key for 5 seconds.
✎
The Hotel TV product family does not support the CLONE function between models that supports the satellite /
T2 operation and models that do not.
For fast, instant cloning during installation, insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
26
English
¦
Setting Auto Initialize
When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings:
Picture, Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the
Picture menu, they can change the settings in those menus so they are no longer standard. If you set the Setting Auto
Initialize function to on, the TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not been cloned are ignored.
The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to on.
Menu
Picture
Menu Item
Picture Mode
Backlight
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Apply Picture Mode
Picture Size
Picture Size
Zoom/Position
4:3 Screen Size
Auto Adjustment
PC Screen Adjustment
Coarse
Fine
Position
Image Reset
PIP
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Colour Space
White Balance
10p White Balance
Gamma
Expert Pattern
Motion Lighting
Picture Options
Colour Tone
Digital Clean View
MPEG Noise Filter
HDMI Black Level
Film Mode
Auto Motion Plus
Picture Off
Picture Mode Memory
Reset Picture
Menu
Sound
System
Menu Item
Sound Mode
Sound Effect
Virtual Surround
Dialog Clarity
Equaliser
Speaker Settings
Additional Settings
DTV Audio Level
Audio Format
Audio Delay
Dolby Digital Comp
Auto Volume
Reset Sound
Accessibility
Audio Description
Subtitle
Menu Transparency
High Contrast
Focus Zoom
Menu Language
Smart Touch Control Settings
Touch Sensitivity
Onscreen Remote Size
Voice Control
Language
Use TV Voice
Recognise Voice Gender
Notifications
Device Manager
Keyboard Settings
Mouse Settings
Time
Clock
Sleep Timer
Wake-up Timer
Eco Solution
Energy Saving
Eco Sensor
No Signal Power Off
Auto Power Off
Smart Security
Auto Protection Time
Change PIN
General
Game Mode
BD Wise
Sound Feedback
Boot Loge
Instant On
Anynet+(HDMI-CEC)
DivX® Video On Demand
English
27
¦
Plug & Play
Hotel Plug & Play automatically performs Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup.
– Hotel Plug & Play is available only one time when power is first turned ON.
– This is available after first setting up the TV and transferring Clone TV data to a USB drive.
– To use next TV, you only need to exit Hotel Plug & Play, connect the USB, then Clone the USB to TV.
– Depending on model and region, some menus may not exist.
Local Set
Change Local Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change
Skip
If you select
Change
E
Local Set
Warning! TV might not function if Local Set is not correctly configured.
When Local Set is changed, TV will turn off automatically to apply it.
EU
Next
If you change the country of the Current Location
The TV is automatically turned off and on
Countries List
Bulgaria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania,
Romania, Serbia, Slovakia, Slovenia, EU-Others
E
If you select Skip
E
Easy Set Up
Intercactive
(Hotel Menu)
Standalone Setup c
(Continue Setup)
Standalone Only
(End Setup)
If you select this, Easy setup will be started.
There are Essential
Details, Channel Scan,
Clock and Terms in Easy setup.
Next
Previous
TV Setup Complete!
Your TV is now ready to use.
OK
E
If you select
Standalone Setup
Select your Language
Select your language to start the on screen setup.
c English
Eesti
Suomi
Fraçais
Deutsch
Press the to move the highlight.
Press the enter button to select. udlr buttons
The Language Setting will be applied to Main Menu and not Plug and Play.
Next
E
Select your language
E
Clock
Previous
You can adjust your time to set DST, Time Zone and clock mode
Clock Mode Auto
Date -- / -- / ----
Time -- : --
Time Zone Auto
DST Off
Set current date and time
-- : --
Next
Essential Details
This is basic setup to use your Smart TV.
Previous
Country Bulgaria
Picture Mode Standard
Please Select your country
Next
E
Auto Tuning
Auto Tuning completed.
Previous
Digital 0
- TV 0
- Radio 0
- Data/Other 0
Analogue 0
Change settings Scan Again
E
Auto Tuning
How do you get your broadcast signal?
Previous c
Both
Terrestrial/Cable
Satellite
Select Both to scan for both
Terrestrial or Cable channels and
Satellite channels.
Next
E
Auto Tuning
To receive channels, configure the options belows then select Scan.
Previous
Aerial Terrestrial
Channel Type Digital & Analogue
Select the connected aerial that you want to use to get channels.
Next
E
Scan
Auto Tuning
Auto tuning is finding channels for you...
Previous
Channel 7
2%
Digital 0
- TV 0
- Radio 0
- Data/Other 0
Analogue 0
Stop
E
28
English
Next
Next
• Plug & Play OSD
– Initial Highlight: Interactive
– If Standalone Only button is selected, Standalone hotel mode is set by default and “Standalone mode is set”
OSD is displayed for 3 seconds.
– TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds.
– When Interactive mode is selected, the Interactive Setup Menu appears. Press the power off button to exit from the Interactive menu.
– When Standalone Plug & Play mode is selected, the “Select Menu Language” OSD is displayed.
• Select Menu Language OSD
– When Standalone Plug & Play is selected from “Easy Set Up” OSD, “Select Menu Language” OSD is displayed.
– Initial Highlight : English
– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
– If the ENTER button is pressed, “Select Area” OSD is displayed.
• Select Country
– Initial Highlight: United Kingdom.
– The Country OSD is displayed and the area can be selected.
• Clock setting OSD
– Display time: 30 seconds.
– The Clock Set item OSD is displayed
– If ENTER button is pressed after setting the clock or in Auto, Picture Mode OSD is displayed.
• Auto Search Mode OSD
– If skip option is selected, this goes to Clock setting OSD.
– If the ENTER button is pressed, auto searching of channels is performed.
– The OSD Display time, from the time that Auto Store is started to the time that Auto Sort is completed, is 30 seconds.
• Picture Mode OSD
– Initial Highlight: Standard.
– The Picture Mode OSD is displayed and the Dynamic or a Standard Picture mode can be selected.
– After selecting the picture mode and the TV enters Standalone Setup Menu OSD, press power off to exit.
English
29
¦
Multi Code Remocon
Multi Code Remocon is a special transmitter which is designed to control each TV with one remote.
This is useful where there is more than one TV in a location, such as in a hospital the set ID number is displayed in the source osd. It is possible to support up to 9 different remote key transmissions for multiple codes.
Each TV has an initial code of "0".
– The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX channel or DTV channel.
– ID code can be from 0 to 9.
– Press the MUTE button and the RETURN button simultaneously for more than 7 seconds and then select the number button to set the code.
– Set ID OSD appears.
– The following words appear: “Remote control code is set to 0. If you want to change Remote control code, enter the chosen digit.” X is the digit number.
✎
This OSD displays until Exit is pressed.
Remote control code is set to 0. If you want to change the Remote control code, enter the chosen digit.
– For example, TV and Remote will be set to ID code #1 if the user presses #1.
– The following words appear: “Remote control code is changed to 1” At this point, the TV can be controlled only by the remote with the same ID code as the TV.
– TV, the following words will be displayed. “ TV ID x”(x is the TV’s ID)
– To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds.
When you stop pressing the buttons, the ID code for both the TV and Remote are reset to “0”. “Remote control code is set to 0.” appears.
30
English
¦
CH Bank Editor (Smoovie TV Only)
Channel Bank Editor edits channels, with 3 different Bank Options.
Depending on the Bank card, there are specific channels Hotel customers can enjoy.
Setting the CH Bank Editor under Stand-alone Mode
1. Enter the Hotel Standalone menu by “ MUTE +1+1+9+ Enter ”
2. Please select SI vendor : “Smoovie”
3. find the new menu option, “Channel Bank Editor”
4. Enter the “Channel Bank Editor”
Hospitality Mode
SI Vendor
Standalone REACH Sever
OFF Network d
SI Vendor Smoovie d
Channel d
Channel Bank Editor
<Depending on model and region, some menu items may not exist>
5. Edit the channel bank like below example.
a. BANK1 (Free channel): Select the channel that will be used when remote doesn’t have any card.
b. BANK2 (Family Card - Green): Select the channel that will be used when remote has a GREEN CARD.
c. BANK3 (Adult Card - Red): Select the channel that will be used when remote has a RED CARD.
Channel Bank Edit
Registered
1 1futech
2 BBC1
3 24ore.tv
4 C3
5 BBC World
6 C5
7 Coming Soom
8 S2
9 S2
Bank1 (4) c c
Bank2 (6) c c c c c c
Bank3 (36) c c c c c c c c c n Move E Select/Deselect R Return
References of using SMOOVIE Remote Controller
1. If you select SMOOVIE as the SI vendor, you should use the SMOOVIE Remote Controller.
2. With the Numeric keys of the remote controller, users can select only the Bank1 channel.
To change the channel using the Green or Red Card, please use channel up/down keys.
3. For the Channel guide or the Channel list, users can see only Bank1 channel list.
English
31
¦
Channel Editor
Channel Editor edits channel number a and name.
– Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode
SI Vendor
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
REACH Solution
Network
Standalone Widget Solution
OFF Service r
Channel Editor
<Depending on model and region, some menu items may not exist>
Simple Steps for channel Editor under Stand-alone Mode
Step
3
4
1
2
5
Broad Outline
Operate ‘Channel Auto Store’ in Hotel Option Menu
Enter ‘Channel Editor’ in Hotel Option Menu
Compile a table related to the final channel lists you want to have
Rearrange channels with the TOOLS Button based on the table you compiled
Press the EXIT or RETURN Button to exit.
<please refer to the following details>
Smoovie On sequence
Step
Smovie TV used (Air/ Cable )
Mixed Channel Map On (Air and Cable both used) Only Air or Cable used
1
2
3
4
5
6
7
8
9
10
If the tv starts with Hotel P&P
Do the P&P, except channel store
Enter Hotel menu
Select smoovie TV in Hotel menu
Select Channel Setup
If P&P already done
Enter Hotel menu
After P&P TV shows hotel menu Setup Mixed Channel Map On
Setup Mixed Channel Map On
Make TV power off & on
Select "Air + Cable" to auto tune
Setup CH Bank Editor
After power off & on, user can use TV
TV power off & on
Enter Hotel menu
Select smoovie TV in Hotel menu
Select Channel Setup
Select "Air + Cable" to auto tune
Setup CH Bank Editor
After power off & on, user can use TV
If the tv starts with Hotel P&P
Do the P&P all (Air or Cable auto tune)
After P&P TV will show hotel menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel menu
Select Channel Setup
(can be skipped)
Select "Air" or "Cable" to auto tune (can be skipped)
Setup CH Bank Editor
After power off & on, user can use TV
Only Air or Cable used
If P&P already done
Enter Hotel menu
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel menu
Select Channel Setup
Select "Air" or "Cable" to auto tune setup CH Bank Editor
After power off & on, user can use TV
32
English
Step
Smovie TV used( Satellite )
Mixed Channel Map On (Satellite and Air or Cable both usedused) Only Satellite used
1
2
3
4
5
6
7
8
9
10
If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done
Do the P&P except channel store
After P&P TV will show hotel menu
Setup Mixed Channel Map On
Make TV power off & on
Enter Hotel menu
Select smoovie TV in Hotel menu
Select Channel Setup
Select Satellite to auto tune
Setup CH Bank Editor
Enter Hotel menu
Do P&P all: Air or Cable auto tune)
Enter Hotel menu
Setup Mixed Channel Map On after P&P TV shows hotel menu
Make TV power off & on
Enter Hotel menu
Select smoovie TV in Hotel menu
Select Channel Setup
Select Satellite to auto tune
Setup CH Bank Editor
Select channel type
- ATV or ADTV for Air
Setup CH Bank Editor
- CATV or CDTV for cable
Select channel type
- ATV or ADTV for Air
- CATV or CDTV for cable
Select smoovie TV in Hotel menu
Select Channel Setup (can be skipped)
Select Satellite to auto tune (can be skipped)
Select smoovie TV in Hotel menu
Select Channel Setup
Select Satellite to auto tune
Setup CH Bank Editor
After power off & on, user can use TV
After power off & on, user can use TV
After power off & on, user can use TV
After power off & on, user can use TV
Channel List
You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1-5.
✎
When you press the CH LIST button on the remote control, Channel List screen displays immediately.
Contents Home
Channel List Guide AllShare Play Schedule Manager Source
R Return
* The displayed image may differ depending on the model.
• All: Shows all currently available channels.
• TV: Shows all currently available TV channels.
• Radio: Shows all currently available radio channels.
• Data/Other: Shows all currently available MHP or other channels.
• Analogue: Shows all currently available analogue channels.
• Favourites 1-5: Shows all favourite channels.
✎
If you want to view added favourite channels press the CH LIST button and use the L (Ch. Mode) button to move between Favourites 1-5.
✎
Using the control buttons with the Channel List.
• T (Tools): Displays the option menu.
• L (Ch. Mode / Channel): Move to the All, TV, Radio, Data/Other, Analogue or Favourites 1-5.
• When you select the Programme View in T (Tools) menu, you can move to other channels using L
(Channel) button.
• E (Watch / Information): Watches the channel you selected. / Displays details of the selected programme.
• k (Page): Move to the next or previous page.
English
33
How to use Schedule Viewing in Channel List
(digital channels only)
When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View.
1. Press the CH LIST button, then select a desired digital channel.
2. Press the TOOLS button, and then select Programme View. The programme list for that channel appears.
3. Press the
▲ / ▼ buttons to select the desired programme, then press the
ENTER E (Information) or INFO button.
4. Select Schedule Viewing, then press the ENTER E button when done.
✎
If you want to cancel Schedule Viewing, follow steps 1 through 3. Select Cancel schedule.
Using Option Menu t
Set each channel using the Channel List menu options (Programme View, Edit Favourites, Lock/Unlock, Edit
Channel Name, Edit Channel Number, Delete, Information, Sort, Edit Mode).
Option menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
• Programme View: Displays the programme when a digital channel is selected.
• Edit Favourites: Set channels you watch frequently as favourites. Add or delete the selected channel in Favourites
1-5.
1. Select the Edit Favourites, then press the ENTER
E button.
2. Press the ENTER E button to select Favourites 1-5, then press the OK button.
✎
One favourite channel can be added to several favourites among Favourites 1-5.
• Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
✎
This function is available only when the Channel Lock is set to On.
✎
The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option.
• Edit Channel Name (analogue channels only): Assign your own channel name.
• Edit Channel Number (digital channels only): Edit the number by pressing the number buttons.
✎
Some areas may not be able to support Edit Channel Name and Edit Channel Number.
• Delete: You can delete a channel to display the channels you want.
• Information: Displays details of the selected programme.
• Sort: Changes the list ordered by channel number or channel name.
• Edit Mode: Select desired channels and edit them.
Using Option Menu t
Set each channel using the menu options (Edit Favourites, Lock/Unlock, Delete, Deselect, Select All).
1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the channel.
2. Press the
▲/▼ buttons to select the desired channel, then press the
ENTER E button. The (c) mark indicates the channel you’ve selected.
✎
You can select more than one channel.
✎
Press the
ENTER E again to deselect the channel.
3. Press the TOOLS button, then select a function and change its settings.
• Edit Favourites: Set the selected channels you watch frequently as favourites.
✎
The Edit Favourites screen has five groups (Favourites 1, Favourites 2, etc.). You can add a favourite channel to any one of the groups. Press the ▲/▼ buttons to select a group.
• Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
✎
This function is available only when the Channel Lock is set to On.
✎
The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option.
• Delete: You can delete a channel to display the channels you want.
• Deselect: Deselect the selected channels.
• Select All: Select all the channels in the channel list.
34
English
¦
My Channel
Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels.
• You must select the country first, or you can not set a genre.
• If you select the genre without adding any channels, the channel list displays all of the available channels.
• My Channel works in Standalone mode only.
• SI Vendor in Standalone mode: This does not work if Smoovie is selected.
• This is in the Hotel Options in Hotel Menu > Service Mode and can be turned on or off.
• The option only works when it is set to On.
• Channel Composition [Genre Mode]
Standard
Hotel
Category
Genre
Ch. Mode
All (Default)
News
Radio
Entertainment
Sport
Hotel
Antenna Mode Activation
Air/Cable Satellite
O
O
O
O
O
O
O
O
O
O
O
O
Description
Provide genre channel mode by each country that master has managed in factory mode.
1
3
6
Current status : Austria/Sports
Country
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
2
4
My Channel
5
7
Genre
All
News
Radio
Entertainment
Sports
Hotel
(Blue)Keep Previous (U/D/L/R)Move (En)Enter
8
* For the number of items to be displayed in the list, refer to the design document.
Key Guide
Button
BLUE
ENTER
Ch. Up/Down
UP/DOWN
RIGHT
RETURN
EXIT
Action
Returns to the screen. (Genre setup: Last Country & Genre)
Selects an item.
Move the highlight by page.
Navigates the each country, genre list. (in a circular manner.)
Selects the highlighted item, and then move the highlight to Genre section.
Returns to the screen. (Genre setup: Last Country & Genre)
Returns to the screen. (Genre setup: Last Country & Genre)
Nav. Help
Keep Previous
Enter
(No Guide)
Move
(No Guide)
(No Guide)
English
35
✎
Notes
• This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre
Mode: Enable)
• The genre is a sub-list for each country.
• The broadcast screen that was being displayed the last memorial channel.
– If user want to keep the previous country & genre channel map, press the ‘BLUE’, RETURN , and EXIT remotecontrol key to close the Front UI.
✎
Etc.
• Default Highlight : Last Memory items (Country, Genre)
• Timeout (60 sec)
Elements
2
3
No
1
4
5
Name
Background Screen
Function Title
Current Status
Country Items
Genre Items
Description
Displays the last memorized channel that appears when TV is turned on.
This is name of the function.
Display current settings the Country/Genre.
The item for the country list is displayed.
Displays the last selected country.
The item for the genre list is displayed.
Displays available genre items by each country that master managed in factory mode. (always provide ‘All’ item)
Displays the last selected genre.
6 Highlight
If the item title is too long to be displayed within the area, Auto Text Sliding works.
7
8
Indicator
Nav. Help
This is displayed when there is a previous or next page.
The key guide is right-aligned.
36
English
Highlight Interaction [Country Items]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
✎
Notes
• Users can navigate the items in each country & genre list by pressing the up or down remote control keys.
• Circular navigation is supported.
1
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
DOWN x 4
UP x 4
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
DOWN UP
END
My Channel
Current status : All Country/Sports
Country
▲
Slovakia
Spain
Switzerland
United Kingdom
Eastern Europe
Other
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
UP x 4
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
DOWN x 4
Genre
All
News
Radio
Entertainment
Sports
Hotel
UP
My Channel
Current status : All Country/Sports
Country
▲
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
Hungary
▼
DOWN
Genre
All
News
Radio
Entertainment
Sports
Hotel
UP x N DOWN x N
My Channel
Current status : All Country/Sports
Country
▲
Slovakia
Spain
Switzerland
United Kingdom
Eastern Europe
Other
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
English
37
Highlight Interaction [Default Genre]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• The current selection of the country is high-lighted.
ENTER / RIGHT
LEFT
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• Default High-light: The current selection of the genre.
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• Seems source error, it should be read as "The other item of the county is high-lighted.". Please verify. (ex.
France)
ENTER / RIGHT
LEFT
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• Default Highlight : All
38
English
Mode Change Interaction 1 (1/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• Current Genre Mode : All Country / Sports
DOWN
LEFT
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
ENTER / RIGHT
ENTER
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
UP
DOWN
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• If the country is selected, highlight moves to genre menu automatically.
ENTER / RIGHT
6
English
39
Mode Change Interaction 1 (2/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
5 6 1
ENTER
1
Info
Genre Mode change to Austria/News.
OK
• The genre mode change complete message is displayed.
• Timeout(5 sec.)
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• Pressing the left key from the genre to country menu highlights an existing selected country item.
ENTER / RETURN / Timeout
Current Status : Austria / News
40
English
Mode Change Interaction 2 (1/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
DOWN
UP x 5
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area Navigation Help Area
• Current Genre Mode : All Country / Sports
ENTER / RIGHT
5
101
Info
Genre Mode change to Austria/News.
OK
ENTER
/
RETURN
/
Timeout
BLUE
/
RETURN
/
EXIT
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• If the country is selected, highlight moves to genre menu automatically.
Current Status : Austria / News
• Current Genre Mode : All Country / Sports
English
41
Power On Scenario [Last Memory]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
POWER
Current Status : Austria / News Power Off
• Current Genre Mode : Austria / News
POWER
My Channel
Current status : All Country/Sports
Country
▲
All Country
Austria
Belgium (Dutch)
Belgium (French)
Czech
France
Germany
▼
Genre
All
News
Radio
Entertainment
Sports
Hotel
Navigation Help Area
• Current Genre Mode : Austria / News
42
English
Genre Editor: This configures the genres of each of the hotel TV channels.
• This can be used through the Hotel Menu (Factory).
• Supported genres include News, Radio, Entertainment, Sports and Hotel.
• More than one genre can be selected for each channel at the same time.
Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
• Supported countries (20 countries): Austria, Belgium, China, Denmark, Finland, France, Germany, Greece, Italy,
Japan, Netherlands, Norway, Portugal, Russia, Korea, Spain, Sweden, Turkey, USA
• If more than one channel is set to a country, the country is registered as a category and users can view the channels by country.
• More than one country can be set to a channel. If the user selects a category, only the channels corresponding to the country are displayed in the channel list.
• If any channel for which the country is set is selected from the channel list, the Edit Countries item is added to the
Tools. Otherwise, the Add to Countries item is added to the Tools.
• * If the corresponding function is executed, a country for the selected channel can be set or canceled.
• Front UI
• Provides the screen where the user can select a country or genre when the user turns the power on.
Left Frame Layout
Key Guide
Button
ENTER
Action
Selects or enters the corresponding Channel Browser area.
RETURN Selects or enters the corresponding Channel Browser area.
UP/DOWN
RIGHT
INFO
Moves the highlight up or down.
Moves the highlight to the Channel Browser area.
Shows the Category Info.
TOOLS
EXIT
Shows the utility function menus.
Cancels and returns to the previous step (Factory Mode).
✎
Notes
• This is a component of the Left Frame (Country Categories).
✎
Etc.
• Default Highlight: ‘The currently selected country’
Nav. Help
(No Guide)
Return
(No Guide)
(No Guide)
(No Guide)
Tools
(No Guide)
English
43
Elements
No
1
Name Description
• When the user enters this screen, the currently selected default item is highlighted.
• The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.)
• Moving the highlight
– Pressing the up or down button moves the highlight.
– If the items cannot be displayed on one page, up and down indicators are provided.
– Once the highlight is moved to a category, the channel list corresponding to the corresponding category is loaded to the Main Frame.
Left Frame [Country Categories]
Standard Category
Hotel
Ch. Mode
Original Tuned
Country
Registered
All Country
Country 1
Country 2
.
Antenna Mode Activation
Air/Cable Satellite
O O
O O
O
O
O
O
O
O
Description
• Lists all the channels registered by the Auto
Tune operation.
• Provides the list of channels and sources specified in the Registered Channels list.
• All Country is the sum of all channels registered to each country. (This is only provided to end users.)
Tools [Registered/Countries Categories]
• • Channel Manager > Channel Category > Tools > Info
• The items are displayed without ‘Channel’.
• If the Registered/Country item in the Left Frame is highlighted, you can enable the corresponding window by pressing the ‘INFO’ remote control key.
• All countries are displayed.
• navigate country items by pressing the up or down key.
Indicators are provided.
44
English
✎
Notes
• This is a definition of the Tools menu in the Left Frame Category.
• Only the Info item for each Register/Country is provided.
Elements
Category Tools menu
Registered, Country Information
• • The items are displayed without ‘Channel’.
Error Cases
Descriptions
Registered Channels. The number of channels of each country.
✎
Notes
• This is the message for when there are no saved channels in the Registered Channels list.
Elements
No Name Description
1 Message
• When entering the browser, if the Registered channels item is empty, a popup message is displayed which enables users to switch to the
Auto Store (Program) menu.
• When both the time and the channel are not configured, and a user enters the Channel Manager, a message that allows the user to switch to the Auto Tuning (Auto Program) operation is displayed in the same way as above.
• This is the message when the time is not configured.
– If the time is not configured, the message is displayed in Factory Mode before entering the Channel Manager.
English
45
✎
Notes
• This is the component for when there are no channels registered to the country category.
Elements
No Description Description
The message is displayed when the currently selected country does not contain any items.
Main Frame [Channel Browser]
46
English
Key Guide
Button Action Nav. Help
CH UP/DOWN
ENTER
RETURN
UP/DOWN
Moves the page.
Selects or enters the corresponding Channel Browser area.
Returns to the previous step (Factory Mode).
Moves the highlight up or down.
Page
Select
Return
(No Guide)
RIGHT
INFO
TOOLS
Moves the highlight to the Channel Browser area.
Shows the Category Info.
Shows the utility function menus.
(No Guide)
(No Guide)
Tools
EXIT Cancels and returns to the previous step (Factory Mode).
(No Guide)
✎
Notes
• This is a component of the Main Frame (Channel Browser).
• The initial highlight is on the channel before entering Factory Mode or the external input.
Elements
No
1
2
3
4
Name
Main Frame
Description
• Shows the channel or the source list of the currently selected category.
Scroll Bar
Navigation Help Area
• Shows the position of the current page amongst the total amount of pages.
• This is displayed whenever a user enters the Channel Manager. (If a user exits and then reenters the Channel Manager, it is displayed again.)
• This disappears when the timeout (5 sec.) is reached or a user presses a key.
Navigation Help Area
• The currently configured country information and the RED buttons are left-aligned.
They are displayed and navigated by group graphically. The key guide is right-aligned.
English
47
Channel Common Elements [+ Icon-method]
Channel list representation rules
Standard Item Construction
ATSC
Digital channels
Analog channels
• Check Box + Status Icon + Digital Channel Number + Channel Name
• Channel number representation format: ###-### (The channel number is represented by ‘-’.)
• Check Box + Analog Icon + Analog Channel Number + Channel Name
• Channel number representation format: ### (‘-’ is not used to represent analog channel numbers.)
DVB (CHEM)
Digital channels
Analog channels
• Check Box + Status Icon + Digital Channel Number + Channel Name
• Channel number representation format: ### (For the maximum length of the channel number, follow the regional specifications.)
• Check Box + Analog Icon + Analog Channel Number + Channel Name
• Channel number representation format: ### (For the maximum length of the channel number, follow the regional specifications.)
Channel list icon representation rules
Item
Dynamic SI
Icon
Channels deleted by
Dynamic SI
Channels added by
Dynamic SI
Analog Channel Icon
Example
NNNNNNNN CH. NAME
NNNNNNNN CH. NAME
NNNNNNNN CH. NAME (The edited channel name.)
Source Channel Icon
NNNNNNNN CH. NAME
Antenna Icon Air
NNNNNNNN CH. NAME
Cable
NNNNNNNN CH. NAME
Satellite
NNNNNNNN CH. NAME
Scrambled Channel Icon
NNNNNNNN CH. NAME
Video Mute
NNNNNNNN CH. NAME
• Channels that have been deleted by the Dynamic
SI but not by the user.
• Channels that have been added by the Dynamic
SI but not by the user.
Priority
1
2
• The analog channel icon is displayed.
3
• A channel that is an input source.
4
• Represents the live channels from the antennas. The Air, Cable or Satellite antenna icons are displayed with the lowest priority.
5
• The scrambled channel icon. This appears for the
Satellite antenna.
• A screen-muted channel. Audio and channel information is provided.
-
-
48
English
Add to Countries / Edit Countries (1/2)
• Channel Manager > Browser > Tools > Add to Countries
Key Guide
Button
ENTER
RETURN
UP/DOWN
LEFT/RIGHT
INFO
TOOLS
EXIT
Action
Selects the highlighted item.
Cancels and returns to the previous screen (Tools).
Moves the highlight over country items.
Moves the highlight.
N/R
Closes the current window and displays the ‘Tools’ menu.
Cancels and returns to the previous step (Factory Mode).
✎
Note
• This is the definition of Add to Countries.
• The highlighted channel or more than one selected channel is added to the Country category.
Nav. Help
Enter
Return
Move
Move
N/R
(No Guide)
(No Guide)
✎
Etc.
• Timeout (60 sec)
English
49
Elements
No
1
2
3
4
5
Name
Add to Countries
Window
Guide
Selection Info
Complete Message
Selection Mark
Add to Countries / Edit Countries (2/2)
Description
• If there are no channels that have been registered to the country list in the selected channels, “Add to Countries” is displayed as the title.
• A check box is displayed depending on whether the country that was selected when entering the screen is registered or not.
• The number of the selected channel or the channel name.
- The channel name is displayed when one channel has been selected: Selected channel: NNNN-NNN ABC
- The number of selected channels is displayed when more than one channel has been selected: Selected Channels : N
• The message is displayed after the completion of the operation. (This message is always displayed if the OK button is selected.)
• How to identify the meaning of multiple channel selection marks
• When all of the items have been registered.
• When only part of the items have been registered.
• When none of the items have been registered.
• Channel Manager > Browser > Tools > Add to Countries
Key Guide
Button
ENTER
RETURN
UP/DOWN
LEFT/RIGHT
INFO
TOOLS
EXIT
Action
Selects the highlighted item.
Cancels and returns to the previous screen (Tools).
Moves the highlight over country items.
Moves the highlight.
N/R
Closes the current window and displays the ‘Tools’ menu.
Cancels and returns to the previous step (Factory Mode).
50
English
Nav. Help
Enter
Return
Move
Move
N/R
(No Guide)
(No Guide)
✎
Notes
• This is the definition for Edit Countries.
• The highlighted channel item or more than one selected channel item is added or deleted from the Country category.
• Timeout (60 sec)
Elements
No Name
1
2
3
Add to Countries
Guide
Complete Message
Description
• If there is a registered channel among the selected channels, Edit Countries is displayed as the title.
• A check box is displayed depending on whether the selected country is registered or not.
• The message is displayed after the completion of the operation. (This message is always displayed if the OK button is selected.)
Edit Channel Number [Swap Type]
• Channel Manager > Browser > Tools > Edit Channel Number
Key Guide
Button
ENTER
RETURN
U/D
Action
Applies the changes and closes the window.
Cancels and returns to the previous screen (Tools).
Changes the channel number of the selected channel.
Nav. Help
Enter
Return
Adjust
0~9
INFO
TOOLS
Enters a digit.
N/R
Closes the current window and displays the ‘Tools’ menu.
Cancels and returns to the previous step (Factory Mode).
Number
N/R
(No Guide)
(No Guide)
EXIT
✎
Notes
• This is the function that changes the channel number. (Swap Type)
• Channel numbers can be changed in all the channel lists and changes are applied to all the channels.
• If the new channel number has not been allocated to another channel, the channel number is updated to the new channel number and the list is sorted again in ascending order of channel number.
• If the new channel number has already been allocated to another channel, follow the Hotel specifications.
✎
Etc. Vertical circulation is supported.
English
51
Elements
No Name
1
Edit Channel
Number Window
2
Warning
Message
Description
• Both the numeric keys and the Up/Down keys are supported.
– Selected Channel: Shows the currently selected channel name.
– Number: Shows the new channel number.
(The currently allocated channel name is also displayed.)
– Name: Shows the currently allocated channel name.
(If there are no channels, it is displayed as “(Empty)”.) : If there is a channel but it does not have a name, the name is represented as “-----”.
• If an already allocated channel is selected
– If the new channel number has already been allocated to another channel, the confirmation message pops up. (Refer to the figure below.)
– If the user wants to change the channel number to one that has already been allocated to another channel, the channel numbers are swapped and saved.
Edit the Channel Number [External Input] (3/3)
• Channel Manager > Browser > Tools > Edit Channel Number
52
English
Key Guide
Button
RED
ENTER
RETURN
U/D
0~9T
INFO
TOOLS
EXIT
Action
If a user presses the button, the channel number is initialized.
Applies the changes and closes the window.
Cancels or returns to the previous screen (Tools).
Changes the channel number of the selected channel.
Enters a digit.
N/R
Closes the current window and displays the ‘Tools’ menu.
Cancels and returns to the previous step (Factory Mode).
Nav. Help
Reset
Enter
Return
Adjust
Number
N/R
(No Guide)
(No Guide)
✎
Notes
• This function allocates an external input source to a channel number. (The changes are applied to all the channels.)
• If the new channel number has already been allocated to another channel, follow the Hotel specifications.
✎
Etc.
• Default Highlight: Channel number area.
• Vertical circulation is supported.
• Timeout (60 sec)
Elements
No Name
1
2
3
Channel Number Area
Source Name
Nav. Help Area
Description
• The channel number area.
– Both the numeric keys and the Up/Down keys are supported.
– If no value is allocated, as many ‘-’ are displayed as the number of digits.
▲ ▲ ▲
--
→
1
→
15
▼ ▼ ▼
• External input name
– Items that cannot be configured are disabled.
• If a user presses the red button, the channel number is initialized.
English
53
Edit Channel Name
• Channel Manager > Browser > Tools > Edit Channel Name
Key Guide
Button
GREEN
ENTER
RETURN
U/D/L/R
Action
Saves the changes and returns to the Channel Manager.
Saves the channel name and moves the cursor to the next field.
Cancels and returns to the previous screen (Tools).
Navigates on the keyboard.
0~9
INFO
TOOLS
Enters a digit.
N/R
Closes the current window and displays the ‘Tools’ menu.
Cancels and returns to the previous step (Factory Mode).
EXIT
✎
Notes
• This is the definition of the keypad that is used for the Edit Channel Name function.
✎
Etc.
• Timeout (60 sec)
Nav. Help
Done
Enter
Return
Move
(No Guide)
N/R
(No Guide)
(No Guide)
Elements
No
1
2
3
Name
Channel Name Edit Window
Description
Channel Name
Keyboard
• The cursor and the character that are currently being entered are in the same colour as the highlight.
• When the maximum number of characters is reached, the cursor disappears.
• For a detailed scenario, refer to the keypad design document.
54
English
Tools [Edit Mode]
Edit Mode
Content Highlight (when the number of the checked item is 0 or 1)
Add to Countries
Edit Countries (when an already-registered item is checked.)
Channel Name Edit
When there is more than one checked item.
Add to Countries
Edit Countries (when an already-registered item is checked.)
Edit Channel Number
Video Mute
Channel Copy (Astra HD +)
Video Mute
Reorder (Satellite)
Select All
Reorder (Satellite)
Select All
Deselect All (this is only displayed when 1 or more items are selected)
Delete
Deselect All
Delete
✎
Notes
• The position of the popup menu: The Tools menu for an item in the left column of the Channel List
→ This is displayed on the right. The Tools menu for an item in the right column of the Channel List → This is displayed on the left.
• If a user presses the Tools button when the highlighted item is not selected, the item is automatically marked as selected.
• For detailed specifications of each function, refer to the NEO Channel Manager.
English
55
CH Banner [when a channel number is allocated to an external input]
✎
Notes
• The TV channel banner specifications are applied.
• When there is an unsupported item or there is no corresponding information, the item values are not displayed.
• The channel name is represented as the ‘external input name’.
Elements
No
1
Name
External Input Name
Description
The Channel List provides access to functions related to GenreTV.
• Country Mode
• Changes the genre mode.
¦
Mixed Channel Map
Mixed Channel Map is a function to mix Air, Cable and Satellite channels.
[ Except for Aus, Singapore, NZ models ]
– Mixed channel Map should be ON in order to mix Air, Cable and Satellite channels.
– Use Channel Editor to sort the channels after turning on 'Mixed channel Map' in Hotel Option Menu.
56
English
¦
Sound Bar
• Samsung Sound-Bars and Hospitality TV
– Use Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to theTV’s sound through the Sound-Bar.
– Models supporting the ARC function are listed below:
• Sound-Bars: HW-F350/F450/F550
• Setting the Sound-Bars to Hotel Mode.
1. Set the following Hotel menu options:
– Hotel option > External Device > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume EN = User Defined.
– Hotel option > Power On > Power On Volume > Set greater than 0.
– Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of Sound-Bar to the HDMI1 port (supporting ARC) on the hospitality TV.
3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
• Power On/Off is synchronized with the TV
• HDMI_CEC defaults to On
• Functions through the “HDMI OUT” port only
• Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s
Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel option menu.
Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and
Max Volume=45.
*This function may differ depending on the model.
¦
Security mode
Design Specifications
• This is to restrict some functions such as TTX and external source (HDMI, USB) input in specific facilities such as a correctional facility.
• The Security menu is password-protected. Access to the Security menu is denied without the password.
• Security Setting
– The Security Setting can be set to ONor OFF.
– The default is OFF.
– Security Setting: If set to On, external source (HDMI, USB) input and the TTX function will be disabled.
• Password Setting
– This allows users to change the password.
– Users must input the current password, a new password, and confirmation of the new password.
• Password Reset
– Thi s is to reset the password.
– The default password is "00000000".
– Password Reset is visible
only in the Factory menu by using the key combination of Info and Factory.
It is not visible using the key combination of MUTE + 1 + 1 + 9 + ENTER .
• Security Setting: If set to On, the SIRCH function is not available.
• Factory Reset will not reset the Security Setting.
English
57
advertisement
Related manuals
advertisement
Table of contents
- 2 Instruction
- 2 Operational Modes
- 2 Still image warning
- 2 Securing the Installation Space
- 4 Accessories
- 5 Installing the LED TV Stand
- 6 Assembling the swivel (32 inch TVs or larger)
- 8 Viewing the Connection Panel
- 11 TV Controller
- 13 Connecting the TV with SBB
- 15 Connecting the Bathroom Speakers
- 17 Connecting the MediaHub HD
- 18 Connecting the RJP (Remote Jack Pack)
- 20 Setting the Hotel Option Data
- 58 Installing the Wall Mount
- 59 Securing the TV to the Wall
- 59 Anti-theft Kensington Lock
- 60 Specifications
- 61 Dimensions