advertisement
4120 Series
Mechanical Boom Angle Indicators
Page 1 of 2
Accurate, Rugged & ALL-Weather
Boom Angle Indicator
Meets OSHA Standards for
Cranes and derricks
Rugged housing withstands weight of SUV
Back lit model meets FEMA regulations for fire apparatus
DESCRIPTION
Rieker's mechanical boom angle indicators are all-weather and will not rust, freeze, or otherwise "hang up" like oldfashioned metal pendulum styles. Like all of our instruments, each indicator is properly dampened for smooth reliable readings.
The housing is designed for easy mounting with two screws, allowing for quick and efficient retrofitting in the field.
With bright, long-lasting LEDs, the backlit models are highly visible for increased safety - especially at night!
APPLICATIONS
The 4120 is recommended for use on any boom where quick accurate inclination measurements must be taken under difficult conditions and harsh environments.
The 4120 meets OSHA Standards for Cranes and derricks and with installation makes the equipment compliant to the standard.
Typical applications include aerial lifts, truck-mounted boom cranes, any fire truck with a mounted boom or ladder, telescoping off-road variable reach fork lifts, cranes and derricks.
FEATURES
Oversized inclinometer for easy read
High visibility markings
Hermetically sealed – will not leak
Weatherproof - will not rust or hang up
UV Resistant
Operational from -50° F to
+180° F
Shock & vibration resistant
Easily installed – quick retrofitting
Right-hand & left-hand models available
12-Volt backlighting - highly visible at night for added safety
610-500-2000
RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA fax: 610-500-2002
www.riekerinc.com
4120 Series
Mechanical Boom Angle Indicators
Page 2 of 2
Dimensions
TECHNICAL DATA
14"w X 6 3/8"h X 1 3/4"d
Degree Range
Degree Markings
-30° through +90°
5° increments
Case Material
100% Polycarbonate (white or black based on pn)
Tube Construction
Clear tube filled with dampening fluid; precision ball (white or black based on pn)
Operating Temperature
-50° F to +180° F
Backlit Model Operating Voltage
12 Volt
Rieker Boom Angle Indicators comply with current OSHA Standards
OSHA -- Occupational Safety & Health Administration, U.S. Department of Labor
• Part Title: Safety and Health Regulations for Construction
• Subpart Title: Cranes, Derricks, Hoists, Elevators, and Conveyors
<Link below goes to the OSHA web site> http://www.osha-slc.gov/OshStd_data/1926_0550.html
<Then follow these breadcrumbs: > Regulations (Standards - 29 CFR) > PART 1926 Safety and Health Regulations for
Construction > 1926.550 - Cranes and derricks > 1926.550(a)(1)
4120 MODEL ORDERING SPECIFICATIONS
LEFT HAND PART NUMBERS RIGHT HAND PART NUMBERS
4120WWL 412OWWR
White case/white label/black markings
4120WBL
White case/black label/white markings
White case/white label/black markings
4120WBR
White case/black label/white markings
4120BBL
Black case/black label/white markings
4120BBR
Black case/black label/white markings
4120WWL-12V
White case/white label/black markings/backlit
4120WWR-12V
White case/white label/black markings/backlit
Contact us today for a quote. OEMs welcome. Quantity pricing available .
610-500-2000
RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA fax: 610-500-2002
www.riekerinc.com
5012P Gradiometer
Mechanical “Ball-in-Tube” Grade (Slope) Indicator
Page 1 of 1
Features
Part Number Shown: 5012P “Gradiometer”
Accurate, Rugged Inclinometer for Measuring Slope or Grade
2 Scales: Inch per Ft-Rise and % Grade
Weatherproof - will not rust or hang up
UV Resistant
Extremely shock and vibration resistant
Description
Easily installed – quick retrofitting
Quick and accurate visual reference
Operational from -50° F to +180° F
A Gradiometer is any of various surveying instruments for measuring angles of elevation, slope, or incline, as of an embankment or roadway. Also called clinometer or inclinometer, the 5012P provides accurate measurement of slope in Percent Grade and Inch Per Foot Rise. Rieker manufacturers these manual type gradiometers (or inclinometers) using precise glass tube and ball construction. All our tubes are filled with a special dampening fluid that controls the movement of the ball. The fluid combined with large, clear number and degree markings make it easy to get quick, accurate readings under a wide variety of severe environmental conditions.
Applications
Plows, graders, excavators, trenchers, and pavers are only a few examples of the types of applications well suited for gradiometers.
Contact us today for a quote. OEMs welcome, quantity pricing available.
DIMENSIONS
MEASURING RANGE
CASE MATERIAL
TUBE CONSTRUCTION
OPERATING TEMPERATURE
GENERAL TECHNICAL DATA
8.0"W X 2.875"H X 0.375"D (203,2MM X 73MM X 9,6MM)
UPPER ±1.5 INCH PER FOOT RISE, IN 0.125” (1/8”) INCREMENTS
LOWER ±13% GRADE, IN 1% INCREMENTS
BLACK ACRYLIC, ENGRAVED MARKINGS FILLED WHITE
CLEAR GLASS TUBE FILLED WITH DAMPENING FLUID; BLACK BALL
-50° F TO +180° F (-46ºC TO +82ºC)
610-500-2000
RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA fax: 610-500-2002
www.riekerinc.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 COVER
- 2 Introductory Page
- 14 Accelerometers
- 14 B Series Static type
- 16 BDK Series Dynamic type
- 98 SBG3i 3-Axis package
- 3 Ball Bank Indicators
- 3 1023W1 traditional ball in tube type
- 72 RDS7-BB digital ball bank type
- 19 CARS Automated Service
- 9 Boom Angle Indication
- 75 Digital Remote LCD Boom Angle Indicators
- 9 Mechanical Boom Angle Indicators
- 12 Bulls-Eye Bubble Levels, Precision Circular
- 32 Electronic Inclinometers
- 32 4..20mA Output (analog)
- 25 H4360 360º, Single Axis
- 32 H6 Dual Axis Programmable
- 46 NGi Single Axis
- 81 SB1i Single Axis
- 90 SB2i Dual Axis
- 119 XBi Stainless Steel Sub Sea
- 21 0..5VDC Output (analog)
- 21 H4A Single Axis
- 29 H5A Single axis (+0-10VDC)
- 38 NB3 fast response sensor
- 49 NGU Single Axis
- 96 SBG2U Dual Axis
- 29 0..10VDC Output (analog)
- 29 H5A Single axis
- 21 RS232 Output (digital)
- 21 H4S Single Axis
- 29 H5S Single axis
- 63 RDI Digital Inclinometers
- 32 RS485 Output (digital)
- 32 H6 ±180º dual axis
- 51 NG360 360º single axis
- 32 CAN Ready
- 107 Servo Inclinometer
- 32 Flex Series Programmable Inclinometers
- 32 H6 ±180º Dual Axis 4..20mA, RS485, CAN
- 11 Gradiometers
- 11 5012P Gradiometer, mechanical
- 7 2064EGM Gradiometer, mechanical
- 3 Mechanical Inclinometers (Tilt Meters)
- 3 1000 Series 10º, 20º, Metal Housing
- 5 2000 Series 26º, 45º, 60º Plastic Housing
- 7 2100 Series Customizable Clinometers
- 63 RDI Digital LCD Display Inclinometers
- 68 Digital Remote LCD (RDR)
- 57 Remote Angle Display (RAD)
- 112 Tilt Switches & Relays
- 112 SlopeAlert Tilt Warning
- 63 RDI Digital Inclinometers
- 85 SB1S 0..5VDC, Open Collector
- 103 SBL1S Safety Relays
- 94 Accessories
- 18 BS24 Mounting Cube (B, BDK, N, NB only)
- 110 RS485 to RS232 Converter
- 94 SBB Mounting Plates (SB types only)
- 121 BACK COVER, contact information