INSTRUCTION MANUAL Ver 1.2

OSD Display

OPERATION

3

LABEL12345 PRESET 001

Preset Label Acrtion Title

Time (Hour:Min:Sec)

Camera ID Date (Day/Mon/Year)

Alarm Information

PTZ Information

I:-2- O:1

CAM1 AM 00:00:00 01/JAN/2012 000/000/x001 z

P/T/Z Information Displays the pan/tilt positions and zoom magnification.

z

Camera ID Displays the selected Camera ID (Address).

z

Action Title Identfies Actions

"PRESET xxx"

"PATTERN x"

When Preset xxx is memorized or the camera reaches Preset xxx.

When Pattern x is in action.

"SWG ×-PRESET xxx" When Swing x is in action. Displays both of Swing number and Preset number.

"UNDEFINED" When a undefined function is called to run

Displays preset labels when the camera arrives at presets.

z

Preset Label z

Alarm Information Displays activated alarms. This information shows current state of

Alarm Inputs and Relay Outputs. If an Input point is ON state, it will show a number corresponding to each point. If an Input point is OFF state, '-' will be displayed.

Example) The point 2 & 3 of inputs are ON and Output is ON. z z

Time/Date

Heater Status

I:-23 O:1

Displays the current time and date.

Displays the Heater Status. If the Heater is OFF, the background of OSD is Blue color. If the Heater is ON, the background of OSD is Orange color.

Speed Dome Camera Instruction Manual

26/65