Paper Does Not Feed Properly/"No Paper" Error. Canon PIXMA TS8150, PIXMA TS8140, Pixma TS8100 series

Paper Does Not Feed Properly/"No Paper" Error

Check1

Make sure paper is loaded.

Loading Paper

Check2

When loading paper, consider the following.

• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.

• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load limit.

However, paper may not feed correctly at the maximum capacity, depending on the type of paper or environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of paper you load at a time to less than half of the paper load limit.

• Always load the paper in portrait orientation, regardless of the printing orientation.

• When you load the paper on the rear tray, place the print side facing UP and align the right and left paper guides with the paper stack.

Loading Paper

• In the cassette, be sure to load only plain paper.

• When you load the paper on the cassette, place the print side facing DOWN and align the right/left/front paper guides with the paper stack.

Loading Paper

Check3

Is paper too thick or curled?

Unsupported Media Types

Check4

When loading postcards or envelopes, consider the following:

• If a postcard is curled, it may not feed properly even though the paper stack does not exceed the paper load limit.

Load Japanese postcards with their postcode column downward on the rear tray.

• When printing on envelopes, see

Loading Envelopes

, and prepare the envelopes before printing.

Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in landscape orientation, they will not feed properly.

Check5

Make sure media type and paper size settings match with loaded paper.

Check6

Make sure that there are not any foreign objects in the rear tray.

409

If the paper tears in the rear tray, see

List of Support Code for Error (Paper Jams)

to remove it.

If there are any foreign objects in the rear tray, be sure to turn off the printer, unplug it from the power supply, then remove the foreign object.

Note

• If the feed slot cover is opened, close it slowly.

Check7

Clean paper feed roller.

Cleaning Paper Feed Rollers

Note

• Cleaning the paper feed roller abrades it, so do this only when necessary.

Check8

cassette.

If two or more sheets of paper feed from cassette at once, clean inside of

410

Cleaning Cassette Pads

Check9

Are transport unit cover and rear cover attached properly?

See Rear View for the positions of the transport unit cover and the rear cover.

If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.

411