![](http://s1.manualzz.com/store/data/048877822_1-1857cd9670fad2b3c4194716d51128c4-128x128.png)
advertisement
![12. THE HISTORY PAGE. GAS G4S SMARTalarm | Manualzz 12. THE HISTORY PAGE. GAS G4S SMARTalarm | Manualzz](http://s1.manualzz.com/store/data/048877822_1-1857cd9670fad2b3c4194716d51128c4-360x466.png)
12. THE HISTORY PAGE
The HISTORY page
Tap on ’HISTORY’ to access the event log.
In the HISTORY menu, you can view a list of the previous 100 event messages reported by your devices. If you want to refresh the page, tap . Only messages allowed by your user profile are displayed.
How to filter the history list
1. Tap ’HISTORY’.
2. Tap ‘Filters’.
3. If you want to filter in relation to dates, then tap ’Date’.
4. Enter the start and end date, and tap ‘OK’.
5. Tap next to the devices that you want to display in the event list.
6. Tap ‘OK’. The History screen displays a filtered list of available events.
Note: To extend battery life, the motion detector and camera detector power down for a two-minute interval after each detection. During this interval, the devices do not transmit detection events. The interval continues until there are two full minutes with no detections.
55
advertisement
Related manuals
advertisement
Table of contents
- 4 1. INTRODUCTION
- 5 2. THE SMARTALARM APP
- 6 3. THE HOME PAGE
- 7 4. ARMING AND DISARMING
- 14 5. SMART RULES
- 29 6. IFTTT
- 30 7. SHORTCUTS
- 33 8. VIDEO
- 40 9. DEVICES
- 47 10. USERS
- 50 11. PLACES
- 55 12. THE HISTORY PAGE
- 56 13. CUSTOMIZING YOUR APP
- 62 14. TUTORIALS
- 63 15. BATTERIES