8933WC/8934B

2. Connection to the network

2. Connection to the network

2.1 System requirements

The following equipments are required to connect the projector to your computer through the network.

■ Common The projector: 1 unit, Computer: 1 or more sets

■ Connecting device for the projector and the computer

For the wired connection *1

LAN cable (CAT-5e or greater): 1 piece

*1: The system for using the network function of the projector requires communication environment conforming to 100Base-TX or 10Base-T.

■ Web browser

Web browser is required to be installed in your computer to use Web control.

NOTE

• The network function is not available when STANDBY MODE is set to SAVING and the projector is in standby mode. Connect the projector to the network after setting STANDBY MODE to NORMAL. (&SETUP menu in the

Operating Guide)

7