Multiblitz X System X5
Manuals and User Guides for Multiblitz X System X5. We found 1 manuals for free downloads User's Guide
Below you will find brief information for flash unit X System X5, flash unit X System X10 AC/DC, flash unit X System X15. These flash units are designed and manufactured without exception in Germany. The X5, X10 AC/DC and X15 units feature a 16-channel radio trigger, which means that you can control up to 16 different flash units using a single radio transmitter. These units also come with a built-in Pre-Flash Eliminator, which prevents unwanted pre-flashes from your camera's flash, ensuring that you get the perfect shot every time. The units are compatible with a variety of sync cables, including sync leads, radio slave cells, and IR triggers.
Key Features
16-Channel Radio Trigger
Built-in Pre-Flash Eliminator.
Sync Lead, Radio Slave, Cell, IR compatible
Speed Mode
Slow Charge Mode
Fan Cooled
Pages: 20 Multiblitz X System X5 User's Guide
Brand: Multiblitz Category: Electrical equipment & supplies Size: 3 MB
Languages: German, English, Turkish
Open manualFrequently Answers and Questions
Is it necessary to exchange the 220-240 V modelling lamp (LUHAL-3, included in the scope of supply for 220-240 V countries) for a 100-130 V modelling lamp (PACHAL, not included in the scope of supply for 220-240 V countries) when I travel and go from 220-240 V mains operation to 100-130 V mains operation? (concerns only X10 AC/DC)
Technically, it is not necessary for the modeling lamp will not take any damage. Practically, we advise to change the modelling lamp in order to assure a correct rendition of colour. Be sure to also apply pyrex dome LUKLA-1 when using a 100-130 V modelling lamp.
Is it necessary to exchange the 100-130 V modelling lamp (PACHAL, included in the scope of supply for 100-130 V countries) for a 220-240 V modelling lamp (LUHAL-3 or VAJOG-2, not included in the scope of supply for 100-130 V countries) when I travel and go from 100-130 V mains operation to 220-240 V mains operation?
Yes, this is absolutely necessary, otherwise you will damage the 100-130 V modelling lamp.
Why does the unit sometimes fires a light flash approx. 15 sec. after switching it off?
The unit automatically dissipates trigger energy. This is a safety precaution, so changing the flash tube for instance can be performed without hesitance.
Why does the unit fires sometimes when I turn down the output control to often in a short period of time?
The unit has to dissipate excess energy every time the output control is being turned down.
What can I do, if a breaker fuse blows out while operating a multiple-flash setup with mains voltage?
To avoid this it is helpfull to activate the „Slow-Charge“ mode. The „Slow-Charge“ mode technology reduces the power input especially during reload-process. See item 1.
Why must I apply pyrex dome LUKLA-1 when using 150 W/100-130 V modelling lamp PACHAL?
100-130 V bulbs with b15 socket do not have a built-in fuse, this is why the pyrex dome has to be applied to the flash unit. 220-240 V bulbs with b15 socket have a built-in fuse.
Why does the unit doesn´t fire when I try to trigger it with the RS 2 radio trigger or radio remote control (TRIGGER HAPPY/TRIGGER ONE)?
Check if a receiving channel of the built-in radio trigger is active. See item 5b.
Why does the unit doesn´t fire when I try to trigger it with the MUSEN infrared trigger?
Check if the “IR/Photo Slave Cell On-Off” button is switched on.
Why does the full control of units doesn’t work with the radio remote control (TRIGGER HAPPY) in a multiple-flash setup?
Check if ID’s and CH are selected on each unit. Just with individual unit ID’s it is possible to address single units in a multiple-flash set up. See item 6. (Radio remote control (TRIGGER HAPPY) sold seperately)
advertisement