RHYTHM P2
Manuals and User Guides for RHYTHM P2. We found 4 manuals for free downloads Getting started guide, Owner's manual, quick guide
Below you will find brief information for P2 Portable Oxygen Concentrator. This portable device supplies supplemental oxygen with pulse delivery, adjustable flow settings (1-5), up to 5 hours of battery life, and real-time alerts for safety. Ideal for daily activities, it includes AC/DC power options and a carry bag for mobility.
Key Features
Portable design for on-the-go oxygen therapy
Pulse delivery system adapting to breathing patterns
Adjustable flow settings (1-5) with clear LCD display
Up to 5 hours battery life (setting 1) and 4-hour recharge
Real-time alerts for low oxygen, battery, and system issues
Compatible with AC/DC power and FAA-approved for travel
Other manuals and documents
Frequently Answers and Questions
How long does the battery last on setting 2?
The battery lasts up to 4 hours on setting 2.
What happens if no breath is detected for 60 seconds?
The device displays 'Absence of Breath' and enters auto-pulse mode until breath is detected.
Can I use the P2 with a humidifier?
No, the P2 is not designed for use with humidifiers or other equipment.
What is the warm-up time after turning on?
The device requires a 2-minute warm-up to reach specified oxygen concentration.
How do I clean the pre-filter cover?
Clean weekly with mild detergent and water, ensuring it is completely dry before use.
Questions & Answers
L L W
How to recharge the battery of the P2 portable oxygen concentrator?
The lithium-ion battery can be recharged using the provided AC adapter (100 V to 240 V) or DC adapter (11-16 Vdc). A full recharge typically takes up to 4 hours. For optimal performance, charge the battery in a room where the temperature does not exceed 75°F (24°C).
V V R
How to troubleshoot charging issues for the portable oxygen concentrator?
Ensure the AC or DC power adapter is connected properly (verify the green light on the AC adapter or the connection to the car's power source). Confirm the battery is properly installed and the latch has clicked into place. The device will charge the battery while plugged in during standard operation.
U U X
How to charge the battery when it is completely dead?
To charge the device, connect the AC power to the P2 concentrator. The green LED on the power adapter will illuminate and the device will beep to indicate it is receiving power. The battery charge status will be displayed when the power adapter is connected.
P P B
Where is the breath sensor located on the P2 Portable Oxygen Concentrator?
The document does not explicitly state the physical location of the breath sensor within the P2 Portable Oxygen Concentrator. However, the 'Parts Diagram' section indicates a 'Breath Detection Light' on the device. The 'General Operation' instructions also mention that the P2 will sense if a user is breathing from it, suggesting that the breath sensing functionality is integrated into the device's oxygen delivery system, likely through the nasal cannula connection. While the document describes the function and alerts related to breath detection, the precise physical location of the sensor is not detailed.
advertisement