advertisement
2.2 ME remote controller
PAR-F27MEA
STAND BY
DEFROST
PAR-F27MEA
CENTRALLY CONTROLLED
DAILY
AUTO OFF
CLOCK
ON OFF
REMAINDER
˚C
TEMP.
ERROR CODE
CLOCK
→
ON
→
OFF
TIMER SET
1Hr.
˚C
FILTER
CHECK MODE
TEST RUN
LIMIT TEMP.
NOT AVAILABLE
ON/OFF
FILTER
CHECK TEST
● Three timer modes are prepared by enriching the timer function.The timer mode can selectively be used depending on the application configuration.
● The range of room temperature setting can be limited by the initial setting.By setting the room temperature range narrower than usual setting, cooling/heating operation with excessive temperature can be prevented thus saving energy easily.
● Equipped with simplified button locking function.
■ Functions
Item
ON/OFF
Operation mode switching
TEMP.
Temperature setting
Fan speed setting
Air flow direction setting
Permit / Prohibit local operation
:Each unit
:Each floor
:Each group
:Collective
● :Each block
✕ :Not available
Operations Display Description
Run and stop operation for a single group
Switches between Cool / Dry / Auto / Fan / Heat.
Operation modes vary depending on the air conditioner unit.
Auto mode is the City Multi R2 and WR2 series only.
Sets the temperature for a single group
Range of temperature setting
Cool/Dry : 19˚C - 30˚C (14˚C - 30˚C)
Heat
Auto
: 17˚C - 28˚C (17˚C - 28˚C)
: 19˚C - 28˚C (17˚C - 28˚C)
( ) in case of using middle-temperature indoor unit.
Models with 4 air flow speed settings: Hi/Mid-2/Mid-1/Low
Models with 3 air flow speed settings: Hi/Mid/Low
Models with 2 air flow speed settings: Hi/Low
Air flow direction angles 100% - 80% - 60% - 40%, Swing,
Louver ON/OFF
Air flow direction settings vary depending on the model.
Individually prohibit operation of each local remote control function (Start/Stop, Change operation mode, Set temperature, Reset filter).
✻ 1: When the local remote controller inactivation command is received from the master system controller, "-
CENTRALLY CONTROLLED -" is displayed.
✕
✻ 1
Prohibition/permission of specified mode
(Cooling prohibited
/heating prohibited
/cooling-heating prohibited)
By the setting from System Controller, the operation for the following modes is prohibited.
At cooling prohibited
At heating prohibited
: Cool, Dry, Auto,
: Heat, Auto,
At cooling-heating prohibited : Cool, Heat, Dry, Auto
Indoor unit intake temperature
Error
Measures the intake temperature of the indoor unit when the indoor unit is operating.
When an error is currently occurring on an air conditioner unit, the afflicted unit and the error code are displayed.
✕
✕
✕
■ System example
Timer operation
Test run
Ventilation equipment
Function to limit the setting range of room temperature
(Set temperature
range limit)
Thanks to the three timer modes equipped, a proper mode can be selected to meet the usage.
One day timer : ON/OFF setting of one time on one day can be applied.
Daily timer : ON/OFF setting by the One day timer can be repeated for
everyday.
Auto OFF timer : OFF timer can be set in a range from 30 minutes to 4 hours.
✻ Setting of Auto OFF timer automatically activates OFF timer at the next operation.
This function can be utilized to prevent the negligence of OFF setting.
✻ Weekly schedule in only one patterns can be employed by connecting Program timer.
✻ 2
This operates air conditioner units in test run mode.
Up to 16 indoor units can be connected to an interlocked system that has one LOSSNAY. LOSSNAY items that can be set are "Hi" "Low" "Stop". Ventilation mode switching is not available.
The range of room temperature setting can be limited by the initial setting.The lowest limit temperature can be made higher than the usual (19˚C) at cooling/drying, while the upper limit temperature lower than the usual (28˚C) at heating.
Remote controller
Remote controller
■ External dimension
Easy-to-operate simplified locking function
(Auto lock function)
External input/output
Setting/releasing of simplified locking for remote control switch can be performed.
· Locking of all switches
· Locking of all switches except Start/Stop switch
By connecting the Program timer "PAC-YT32PTA", a weekly schedule can be controlled. External start/stop control and emergency stop is not supported.
Unit:mm
(Front view) (Side view) (Rear view)
130 19
3- 5
46
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project