Getting Started. Newport CONEX-CC Controller, CONEX-CC

CONEX-CC Controller GUI Manual

3.0

Getting Started

3.1

Discover Instruments

Start the Controller GUI from

Newport\MotionControl\CONEX-CC

.

Next, click on “

Discover

” button and the number of instruments discovered will appear. This window allows the user to select a com port where the desired instrument is connected.

EDH0277En1042 — 12/18

NOTE

When more than one CONEX-CC instrument is connected, this window allows the user to switch the instruments between X and Y axes. To discern a com port for a specific instrument, note their COM number in the Device Manager when the connection is added.

Next, click “

Launch Applet

” button.

4