CHAPTER 3 VIZIO REMOTE CONTROL. Vizio M160MV

VIZIO M160MV User Manual

Chapter 3 VIZIO Remote Control

Installing the Batteries

1. Remove the battery cover.

2. Insert two AAA batteries into the remote control.

Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment.

3. Replace the battery cover.

Precautionary Tips for Inserting the Batteries:

 Only use Alkaline AAA batteries.

 Do not mix new and old batteries. This may result in cracking or leakage that may cause a fire or lead to personal injury.

 Inserting the batteries incorrectly may also result in cracking or leakage that may cause a fire or lead to personal injury.

 Dispose of batteries according to local hazardous waste regulations.

 Keep the batteries away from children and pets.

Remote Control Range

 Point the remote control directly at this sensor for the best response to the remote signal.

 Do not place any obstacles between the remote control and the remote control sensor.

 The effective range of the remote control is approximately 22 feet (7 meters) from the front of the remote control sensor, 30° to the left and right, 20° up and down.

VIZIO Remote Control Precautions

 The remote control should be kept dry and away from heat sources. Avoid humidity.

 If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the batteries are low or exhausted, replace them with fresh batteries.

 When not using the remote control for a long period of time, remove the batteries.

 Do not take the batteries apart, heat them, or throw them into a fire.

 Do not subject the remote control to undue physical stress, such as striking or dropping it.

 Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.

12

www.VIZIO.com