If a menu screen appears. Alpine IVA-D901

If a menu screen appears

On DVDs and Video CDs with playback control (PBC), menu screens may appear automatically. If this happens, perform the operation described below to start playback.

DVD menu

1 Press 7(PAGE 1/3) twice.

The Function Guide is switched.

2 Use 1('), 2(.), 3(/) or 4(;) to select the desired item, then press 5(ENTER).

• For some discs it is possible to select items directly from the menu screen using the number buttons (“0” to “9”) on the supplied remote control. Then, press ENTER.

Video CD menu

Use the number buttons (“0” to “9”) on the supplied remote control to select the desired number. Then, press

ENTER.

When the PBC function is set to OFF, the menu screen is not displayed. In this case, set the PBC function to ON.

Operation from the remote control:

Press MENU.

Each pressing switches PBC ON and OFF.

Operation from the main unit button:

1 When the Video CD mode is selected, press 5(PBC).

Each pressing switches PBC ON and OFF.

2 Press 1 ( g ) or 3 ( f ) to select a menu item.

In some discs, the DVD menu screen can be displayed.

Operation from the remote control:

Press MENU, or press and hold TITLE for more than 2 seconds.

Operation from the main unit buttons I:

1 When DVD mode is selected, press 5 (DVD MENU).

The Function Guide is switched.

2 Press 1 ('), 2 (.), 3 (/), 4 (;) or 5(ENTER) to set the item.

Operation from the main unit buttons II:

1 When DVD mode is selected, press 7 (PAGE 1/3).

The Function Guide is switched.

2 Press 5 (TITLE MENU).

3 Press 1 ('), 2 (.), 3 (/), 4 (;) or

5 (ENTER) to set the item.

• By pressing 6 ( DVD RETURN), the screen returns to the previous one.

To check the disc working status during play

1 Press V.SEL when your vehicle stops.

Each pressing switches the visual source.

The menu screen of the DVD mode is displayed.

Then disc working status can be checked.

2 Press V.SEL again to return DVD screen.

Each pressing switches the visual source.

< ex. DVD display >

1 Current chapter number

2 Current title number

3 Repeat setting (Default setting-disc repeat)

4 Current audio stream

5 Current subtitle language

6 Current angle number

7 Elapsed playing time of current chapter

Stopping Playback (PRE STOP)

Press the stop button during playback to stop playback. That position is stored in the memory.

1

Press 4 ( L ) once during playback.

“PRE STOP” is displayed.

2

Press 2 ( :/J ) in the PRE STOP mode.

Playback starts from the position at which it was stopped.

• For some discs, the position at which playback was stopped may not be accurate.

Stopping Playback

Press 4 ( L ) twice or press once for more than 2 seconds during playback.

“STOP” is displayed, and playback stops.

• Playback stops even when L on the supplied remote control is pressed for more than 2 seconds.

• Playback starts from the beginning when 2 ( :/J ) is pressed while playback is stopped.

16

-EN