Calling by the address book. Alpine IVA-D901

Calling by the address book

From your vehicle, call from the address book registered in the portable telephone.

1

Press and hold the Rotary encoder for more than

2 seconds.

The Speed Dial display appears.

2

Press 7 (RETURN).

The Telephone menu display appears.

3

Press 2 (PHONE BOOK).

The Phone Book display appears.

4

Turn the Rotary encoder to select a receiver, then press the Rotary encoder .

The Select display appears.

• By pressing 1 (ALPHABET DN) or 2 (ALPHABET UP), the names are listed in alphabteical order.

• If no data is in the PHONE BOOK, "NO MEMORY" is displayed.

Press 7 (RETURN) to return to the Telephone menu display.

5

Press 1 ( ) to place the call.

6

To cut the call, press 2 ( ). Or the call is automatically cut in 5 seconds after finishing.

Calling by the outgoing / incoming / absent incoming history

You can place a call to one of the last 999 calls by the outgoing/ incoming/absent incoming history.

1

Press and hold the Rotary encoder for more than

2 seconds.

The Speed Dial display appears.

2

Press 7 (RETURN).

The Telephone menu display appears.

3

Press 3 (CALL LOG).

The Call log display appears.

4

Press either 1 (DIALED NUM.), 2 (MISSED

CALLS) or 3 (RECEIVE CALLS).

DIALED NUM.: Outgoing history list display

MISSED CALLS: Absent incoming history list display

RECEIVE CALLS: Incoming history list display

• If no history is registered to any of the lists, NO MEMORY is displayed.

To return to Telephone menu display, press 7 (RETURN).

5

Turn the Rotary encoder to select a receiver, then press the Rotary encoder.

The Select display appears.

6

Press 1 ( ) to start call.

7

To cut the call, press 2 ( ). Or the call is automatically cut in 5 seconds after finishing.

SMS (Short Message Service) Operation

You can receive messages, show the contents of messages, and send standardized sentences.

When a message is received, an icon is indicated on the display.

Receiving a Short Message

1

Press the Rotary encoder for more than 2 seconds.

The Speed Dial display appears.

2

Press 7 (RETURN).

The Telephone menu display appears.

3

Press 5 (SMS READ).

The SMS Read display appears.

4

Turn the Rotary encoder to select one of the received message.

5

Press the Rotary encoder.

The SMS Inbox display appears.

The contents of the received message is displayed up to

140 letters.

REPLY: Replies to the sender by return mail.

Standardized sentences can be selected in the display (refer to “Sending a

Standardized Sentence,” page 43).

USE NUMBER: Replies to the sender by phone. The

Select display appears. Place a call by pressing 1 ( ).

RETURN: Returns to the SMS Read display.

• When the unit receives a message, the new reception icon appears.

42

-EN