Scanner Selection. Docucap DocketPORT 487

ScanSharp 6 User Manual

Version 1.0

December 29, 2011

6.1.3. Scanner Selection

At the top of the main screen, you will see “File” and then a “Select Scanner” dropdown box from which y ou can select the currently used scanner. Next to it is the “Options” dropdown, from which you can configure some settings, such as Image, Output, Header & Footer, Print and more. From the Options menu, you may also choose to calibrate or clean your scanner. The buttons directly below these menus allow you to manually scan, (if auto-scan is disabled), file, print, calibrate, clean, change settings, and ask for help.

When you load ScanSharp®, the configurations will populate a list of available TWAIN drivers for your machine. After you click the dropdown and select your scanner and ScanSharp® will automatically try to detect the scanner you have selected. If you do not see your scanner in the Scanner list, and we have provided you with your scanner, please refer to the CD that came with the scanner or visit our site at

Page 13 of 27

Copyright © 2011 Innovative Card Scanning, Inc. All rights reserved.

ScanSharp®, ScanOCR® and related logos are trademarks of Innovative Card Scanning, Inc.