advertisement
2 OVERVIEW
Rear Panel
The rear panel contains a switched power outlet; connectors for video, audio, and RF cabling; data output; and modem and data interface connectors. Some connectors are not enabled and require the support of application software.
Figure 2-2 Rear panel
3
4
5
6
Table 2-2 Rear panel connections
1 Cable In — Connects to cable signal from your service provider
2 RF Out — Ch 3/4 modulated audio/video (SDTV) to DVD players or VCRs
M-Card — Inserted M-Card)
Serial — Service only
S-Video — Connects to S-Video (SDTV) input of TV or VCR
Digital Audio (S/PDIF) — Provides Dolby® Digital 5.x audio or PCM output
7
8
YPbPr — Component video output (HDTV)
Video/Audio — Composite Video (SDTV) /Audio inputs and outputs
9 HDMI — High-Definition TV (HDTV) connector
10 Ethernet* — Network connection
11 USB* 2.0 — High-Speed peripheral device connection
12 IEEE-1394 — Audio and video device connection
13 Power cord connector
* Availability of certain features is dependent upon application support.
M-Card™
The M-Card is required to view cable television programs, previously recorded programs on the DVR, or interactive on-demand programs. The M-Card should not be removed.
7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 12 Features
- 12 Tuner
- 12 Standard Audio/Video Features
- 12 Standard Data Features
- 13 Standard Miscellaneous Features
- 14 If You Need Help
- 14 Calling for Repairs
- 15 Front Panel
- 15 Front Panel Format Button
- 17 Rear Panel
- 17 M-Card™
- 19 Before You Begin
- 19 Video Connection Options
- 20 Audio Connection Options
- 20 Installation Overview
- 22 Cabling to an HDTV for Video
- 23 Cabling to an HDTV and an A/V Receiver
- 24 Cabling to a Standard-Definition TV and an A/V Receiver
- 25 Cabling to a Standard-Definition TV and Audio Receiver
- 26 Data Device Connections
- 27 Operational Check for the Remote Control
- 27 Optimizing the High-Definition Settings
- 29 Graphics Overlaying the Video
- 31 Using the Diagnostics
- 32 General Status
- 34 Purchase Status
- 35 Out-Of-Band (OOB) Status
- 37 Agile OOB Tuner Hunting
- 38 In-Band Status
- 40 Unit Address
- 42 Separable Security
- 44 Current Channel Status
- 47 RF Modem (Upstream)
- 49 Code Modules
- 52 Memory Configuration
- 53 Audio/Video Status
- 56 Interface Status
- 59 User Setting Status
- 61 DOCSIS Status
- 64 Application Specific Information
- 65 Interactive Status
- 67 Keypad—Front Panel Display